Skip to content
View in the app

A better way to browse. Learn more.

Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

network speed much slower when running a docker on br0

Featured Replies

hi there. I just came across a weird issue with my network speed. I noticed that the file transfer to both of my my Windows machines is capped at around 500 Mbit/s. The weird thing is, the speed does not drop while docker is disabled. With docker disabled I get around 800 Mbits. I tested with iperf after a reboot in all directions, multiple connections also tested. Network speed drops to around 500 Mbits as soon as I start one docker container which is on the br0 network. It does not matter how much dockers on br0 I start. It seems like some kind of limitation kicks in at the moment when br0 gets used. My custom docker network for SWAG does not have that problem. It only happens when I start a docker with dedicated IP on br0. Tried to disable bonding, no effect. Unraid runs on a AsRock H310CM-ITX/ac Board with Intel Core i3-8100, 24GB of RAM, NVIDIA RTX3060 and Intel I219V NIC (onboard).
Any ideas what could cause this? Thank you in advance!

  • 1 year later...

Did you ever find a way around this? i'm finding a very similar issue where all networking is capped to about 500Mbit whenever the docker is running.

Even if I put a container on host it's throughput is capped, if I set up a separate bridge on a different NIC it is still capped, if I speedtest on a VM on that bridge it is capped.

 

if I disable docker it runs at line speed, used to be much faster. perhaps IPvlan VS MACvlan? I havent tried comparing that yet.

  • 1 month later...

Old post but experienced the same. Was debugging slow samba speeds. You can see below at which point the docker service was enabled. Macvlan IPvlan made no difference.

 

Any suggestions?

 

[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.00   sec   112 MBytes   938 Mbits/sec
[  4]   1.00-2.00   sec   112 MBytes   939 Mbits/sec
[  4]   2.00-3.00   sec   112 MBytes   936 Mbits/sec
[  4]   3.00-4.00   sec   112 MBytes   941 Mbits/sec
[  4]   4.00-5.00   sec   111 MBytes   931 Mbits/sec
[  4]   5.00-6.00   sec   112 MBytes   936 Mbits/sec
[  4]   6.00-7.00   sec   112 MBytes   939 Mbits/sec
[  4]   7.00-8.00   sec   111 MBytes   933 Mbits/sec
[  4]   8.00-9.00   sec   111 MBytes   934 Mbits/sec
[  4]   9.00-10.00  sec   112 MBytes   937 Mbits/sec
[  4]  10.00-11.00  sec   111 MBytes   927 Mbits/sec
[  4]  11.00-12.00  sec   111 MBytes   931 Mbits/sec
[  4]  12.00-13.00  sec   112 MBytes   940 Mbits/sec
[  4]  13.00-14.00  sec   112 MBytes   935 Mbits/sec
[  4]  14.00-15.00  sec   112 MBytes   938 Mbits/sec
[  4]  15.00-16.00  sec   112 MBytes   939 Mbits/sec
[  4]  16.00-17.00  sec   112 MBytes   938 Mbits/sec
[  4]  17.00-18.00  sec   111 MBytes   933 Mbits/sec
[  4]  18.00-19.00  sec   112 MBytes   938 Mbits/sec
[  4]  19.00-20.01  sec   111 MBytes   929 Mbits/sec
[  4]  20.01-21.00  sec   110 MBytes   926 Mbits/sec
[  4]  21.00-22.00  sec   111 MBytes   929 Mbits/sec
[  4]  22.00-23.00  sec   111 MBytes   930 Mbits/sec
[  4]  23.00-24.00  sec   112 MBytes   937 Mbits/sec
[  4]  24.00-25.01  sec  21.2 MBytes   176 Mbits/sec
[  4]  25.01-26.01  sec  59.4 MBytes   498 Mbits/sec
[  4]  26.01-27.01  sec  48.0 MBytes   403 Mbits/sec
[  4]  27.01-28.00  sec  62.6 MBytes   531 Mbits/sec
[  4]  28.00-29.01  sec  31.1 MBytes   259 Mbits/sec
[  4]  29.01-30.00  sec  99.0 MBytes   836 Mbits/sec
[  4]  30.00-31.00  sec  38.1 MBytes   319 Mbits/sec
[  4]  31.00-32.01  sec  48.8 MBytes   404 Mbits/sec
[  4]  32.01-33.00  sec  35.8 MBytes   304 Mbits/sec
[  4]  33.00-34.01  sec  44.2 MBytes   369 Mbits/sec
[  4]  34.01-35.00  sec  95.0 MBytes   802 Mbits/sec
[  4]  35.00-36.00  sec  56.5 MBytes   473 Mbits/sec
[  4]  36.00-37.01  sec  26.5 MBytes   220 Mbits/sec
[  4]  37.01-38.01  sec  37.0 MBytes   311 Mbits/sec
[  4]  38.01-39.01  sec  67.9 MBytes   570 Mbits/sec
[  4]  39.01-40.01  sec  25.5 MBytes   214 Mbits/sec
[  4]  40.01-41.00  sec  55.0 MBytes   464 Mbits/sec
[  4]  41.00-42.00  sec  31.5 MBytes   264 Mbits/sec
[  4]  42.00-43.00  sec  71.5 MBytes   600 Mbits/sec
[  4]  43.00-43.60  sec  27.4 MBytes   380 Mbits/sec

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.