wayner Posted January 5, 2022 Share Posted January 5, 2022 I built a new server and it has been running fine for a couple of weeks. Today I went to reboot it and I can no longer attach to the webGUI. Here is the diagnostics file. I don't know if this caused issues but in the last couple of days I installed both an Ubuntu 20.04hoylak-diagnostics-20220105-0900.zip and a Win11 VM. Maybe there is a hardware issue with the VMs? I do see this in the libvrt.txt log: 2022-01-05 13:54:23.322+0000: 8589: error : virNetSocketReadWire:1803 : End of file while reading data: Input/output error 2022-01-05 13:54:25.500+0000: 8589: error : virNetSocketReadWire:1803 : End of file while reading data: Input/output error 2022-01-05 13:54:26.858+0000: 8589: error : virNetSocketReadWire:1803 : End of file while reading data: Input/output error I see another thread here discussing this virNetSocketReadWire error. Do I have the same issue? Quote Link to comment
SmartPhoneLover Posted January 5, 2022 Share Posted January 5, 2022 (edited) I'm using the same beta version as you (6.10 rc-2), and also have 3VM installed and running without any issues: Ubuntu 21.10, W11 and W10. I have rebooted my server at least 3-4 times in the previous days (2 days ago) as I was doing some changes to my array and pools (install Perc H200), and unRAID didn't show me any error. The WebUI was fully accessible all the time. Edited January 5, 2022 by SmartPhoneLover Quote Link to comment
trurl Posted January 5, 2022 Share Posted January 5, 2022 57 minutes ago, wayner said: no longer attach to the webGUI Do you mean you can't access the Unraid webUI from another computer on your LAN? Quote Link to comment
wayner Posted January 5, 2022 Author Share Posted January 5, 2022 Correct, I cannot access the unRAID webGUI. It boots up and I can ssh into it, and I can see the Linux boot screen on a local monitor. But the WebGUI does not appear to be active. I thought I had attached my diagnostics file, but it may not have worked. Here they are: hoylak-diagnostics-20220105-0900.zip Quote Link to comment
Solution trurl Posted January 5, 2022 Solution Share Posted January 5, 2022 Have you tried accessing it by IP? Quote Link to comment
wayner Posted January 5, 2022 Author Share Posted January 5, 2022 I must have had some sort of a caching issue as I tried accessing it from a different browser (edge) and now it works. But on Firerfox it kept giving me an Unable to Connect error. Thanks for your help. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.