Skip to content
View in the app

A better way to browse. Learn more.

Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

2 Existing PCs, which to take?

Featured Replies

Hi, my other "Server" died and I decided to finally use some easy Software, unraid.

 

The current Hardware prices are too high for me atm and therefore I want to take one of my old Systems, but I don´t know which one I should take.

Especially thinking about some months in the future where I have filled everything.

 

1.)

AMD 1055T

6Sata + PCIe3 Slots, 14Gb Ram

80-150Watts

 

2.)

Atom Board J1900H

2 Sata, 100mbit, PCIE2_x1, 8GB Ram

10W

 

 

Usage:

2 people, not more than one video at a time

File Storage

Plex, Calibre, Ubooquity, szurubooru, Komga, Backup Server

5 disks, 1 SSD

 

The System is currently running on the Atom Board.

My problem is now that the 1055 had some start problems where it didn´t start reliably anymore, and way more important, the power consumption is quite high.

With the big System we are talking about 50-100€ per year and the Atom around 7€ for power, if I assume 4hours per day, which is too low.

I would have to buy an USB3 to 1GB Adapter + a 4 Sata PCIE Card for the Atom. Which might or might not make problems... They would cost roughly 60€.

 

 

My Stuff is currently running on the Atom, it is okay so far. However, the CPU runs at around 18% and Ram 60% when I am doing nothing. Just letting the Containers run and being on the Main Site.

When a 4k HDR film is running the CPU goes up to 60%, when at the same time a Scan runs it goes up to 85%.

When I have to transcode a Subtitle the CPU dies.

I could backup everything and test it on the 1055, but it is not even able to play 4k movies, so I have my doubt that it would be any better for transcoding. However, it should be better for all those Containers.

 

Expected files:

500 movies, 2500 shows, 1000 books, 100*300 Manga Volumes.

 

 

Soo... when you factor in when I have transferred all my stuff and added a parity disk, do you think that the Atom would still be able to run properly?

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.