January 17, 20224 yr I just received my new case, an Inter-tech 4u-4724 Link: https://www.inter-tech.de/en/products/ipc/storage-cases/4u-4724 The case has two USB 2.0 frontpanel connectors, the wires are seen here: (only 1 of 2 cable sets in picture) https://imgur.com/a/FdUwJHx Found this pinout explanation, giving me the pin-names needed: Motherboard manual shows the pinout for the onboard USB connectors https://imgur.com/a/AqOxUyA Model: Asrock D1541D4U-2O8R Now, I have crossed out the SSTX and SSRX connectors, as they won't be used, but that leaves me with a problem. The VCC,Data+,data- connector from the frontpanel is combined, with gnd being separate. So, two options: 1: Motherboard and case maker have a disagreement on how the connectors should be* 2: I've misunderstood and the IntA_P_SSRX- and IntA_P_SSRX+ are in fact the connectors I need for Data+ and Data- Can anyone confirm if its 1 or 2? *Edit: Or, the case was just designed to only go into a USB 2.0 connector, and not to support being used in usb 3.0 boards... (Sidenote: Browser wouldn't upload files to the forums, so resorted to imgur links instead) Edited January 17, 20224 yr by hoejholm
January 17, 20224 yr 1 hour ago, hoejholm said: Edit: Or, the case was just designed to only go into a USB 2.0 connector, Yes, those cables are for USB 2.0.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.