January 20, 20224 yr Trying to create a windows 10 VM and getting this page? Ive never seen this page and have no idea why its randomly appearing. Using unraid 6
January 20, 20224 yr What do you mean by randomly?Sometimes it boots sometimes it goes to the uefi shell? In your screenshot you only have fs0, which is the installation media, no trace of any other uefi disk to boot from.
January 20, 20224 yr Solution I understood....You need to be fast enough to press any key when the vm boot. Once in uefi shell, type exit and press enter, then you will see a message to press any key to boot from the dvd, so press any key and the vm will boot from the iso.
June 16, 20224 yr On 1/20/2022 at 1:43 PM, ghost82 said: I understood....You need to be fast enough to press any key when the vm boot. Once in uefi shell, type exit and press enter, then you will see a message to press any key to boot from the dvd, so press any key and the vm will boot from the iso. I have been struggling to do this I press the key but no boot, even when setting long delay.
June 16, 20224 yr Type exit. Will go to bios, select the qemu drive as boot media hit enter and it will start. It will spin couple of minutes. Be patient
June 16, 20224 yr 33 minutes ago, juan11perez said: Type exit. Will go to bios, select the qemu drive as boot media hit enter and it will start. It will spin couple of minutes. Be patient No going round in circles. 1 set the device 2 it offers press key boot 3 press key 4 type exit 5 back in the bios something Iam doing wrong!? Edited June 16, 20224 yr by oOSGearOo
June 16, 20224 yr 2 hours ago, oOSGearOo said: It says guest not running or started? This has nothing to do to your issue, it refers to the qemu guest agent, which you could install inside the windows vm once the os is installed. If everything is set correctly you have 3 choices to run the windows installer: 1. once in the uefi shell: 1a. Type exit press enter --> this will go to ovmf bios 2a. Select continue, press enter 3a. When prompted to press a key to boot from cd/dvd, press a key 2. once in uefi shell: 2a. type FS0: press enter type cd EFI\BOOT\ press enter type BOOTX64.EFI press enter 3. boot your vm and be fast enough to press a key to boot from the windows dvd before entering the uefi shell
June 16, 20224 yr 2 hours ago, ghost82 said: This has nothing to do to your issue, it refers to the qemu guest agent, which you could install inside the windows vm once the os is installed. If everything is set correctly you have 3 choices to run the windows installer: 1. once in the uefi shell: 1a. Type exit press enter --> this will go to ovmf bios 2a. Select continue, press enter 3a. When prompted to press a key to boot from cd/dvd, press a key 2. once in uefi shell: 2a. type FS0: press enter type cd EFI\BOOT\ press enter type BOOTX64.EFI press enter 3. boot your vm and be fast enough to press a key to boot from the windows dvd before entering the uefi shell I have made two disc's I have windows machine I have maid install iso I have also gone to site in the unraid docs And Got an install iso from their. Internatiopnal one..... I have followed the instructions above to no end, I type BOOTX64.EFI and press enter this brings me to press any key to boot....... when I hit a key it returns me to the prompt The internation DVD brings up this. Edited June 16, 20224 yr by oOSGearOo Spelling
June 17, 20224 yr On 6/16/2022 at 4:28 PM, oOSGearOo said: this brings me to press any key to boot....... when I hit a key it returns me to the prompt sorry but, which prompt? On 6/16/2022 at 4:28 PM, oOSGearOo said: The internation DVD brings up this. It seems this is a boot from a corrupted vdisk and not from the iso dvd, is your vdisk empty? When you boot the vm does the keyboard work in ovmf? Edited June 17, 20224 yr by ghost82
June 17, 20224 yr 24 minutes ago, ghost82 said: sorry but, which prompt? It seems this is a boot from a corrupted vdisk and not from the iso dvd, is your vdisk empty? When you boot the vm does the keyboard work in ovmf? Back to the prompt where I can fire again "BOOTX64.EFI" You maybe right the vdisk part! I have deleted the VM and maid a new one, one would think that it would wipe out the vdisk but I don't 100% know, when remade its the same as B 4. Thanks
June 17, 20224 yr Hi I envoked the mover script now VNC wont connect to view output. EDIT VNC on the computer local works I have manually deleted the VDISC the VM refused to load so Deleted it and started again. created a new VDISC still the same tho. -- Data Edited June 17, 20224 yr by oOSGearOo ADD CONTENT
June 17, 20224 yr Una-allocated I don't know if this is a problem Edited June 17, 20224 yr by oOSGearOo
June 18, 20224 yr Hi Think I have found my problem, when drilling down to see it in the terminal. Going to try again. While changing the vdisk directory name to one without space the problem remains. Edited June 18, 20224 yr by oOSGearOo Additional info added
June 18, 20224 yr 22 hours ago, bigbangus said: I have the exact same issue right now. I probably should have just posted in here No you should have your own thread and let the OP have this one. Your other thread already has replies. Anybody wishing to help this user go to his linked thread.
June 18, 20224 yr I have approached unraid via email and highlighed this thread. I attach server logs below hopefully they can help sort this out. tower-diagnostics-20220618-1907.zip tower-diagnostics-20220619-0538.zip Edited June 19, 20224 yr by oOSGearOo addional logs *0538.zip
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.