Sharing UNRAID eth1 VLAN with Shinobi - procedure check


Recommended Posts

See below screenshots of 2 ethernet physical connections in UNRAID.

Objective is to install Shinobi docker for CCTV on separate VLAN that should not have access to array data or mgt interfaces.

  • et0 10G NIC is intended for UNRAID array sharing only. Working OK.
  • eth1 1G MB NIC is intended for Shinobi VLAN bridge. CCTV cameras on that VLAN should not have access to eth0 and array.
    • Bridging has been enabled for eth1 and CCTV VLAN 100 
    • Switch has been configured to isolate eth1 physical from 192.168.1.1/24. That's why eth1 is not able to talk to router and gets automatic private IP address: 169.254.187.134

Please help me review Network Settings configuration:

Thanks!

image.thumb.png.3cf7d3aeb63cec6c45556413c25e6016.png

image.thumb.png.efe5ed412f959cf9d1817efb82b27f97.png

 

Creating a VM to check VLAN is accessible:

Options are virbr0 (assume means eth0 virtual bridge), br1 (assume means eth1 virtual bridge) & br1.100 (CCTV VLAN)

image.png.9bd13109c7ecee5d7835add4721bbcc8.png

 

Edited by cometship
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.