January 20, 20224 yr Hi all, I'm running unRaid 6.9.2 and have selected "3ware" as my disk controller with twa0 as an additional parameter to get the SMART calls working. more details here: Each drive is showing it's SMART data correctly under it's own device page, one of those drives has failed SMART tests and is showing as an immediate failure however on the dashboard it shows as healthy, I suspect this is because the web ui isn't using the additional parameters set for the controller/disks under settings (same reason I don't see temperature on the dashboard but can see it on the drives device page). Is there any way around this, or a way to get email notifications for failures like this? P.S. I tried installing the latest RC of unRaid (as suggested on another post) however now the custom controller doesn't appear to work, I get an error running the smart command that worked in 6.9.2: smartctl -d 3ware,21 -a /dev/twa0 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.14.15-Unraid] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org No major number for /dev/twa listed in /proc/devices. Is the 3w-9xxx driver loaded? Smartctl open device: /dev/twa0 [3ware_disk_21] failed: setup_3ware_nodes("twa", "3w-9xxx") failed
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.