April 24, 201115 yr So my server has been up for 3 months or so running flawlessly, but that last day or so it was being weird in that it would give me page not found(or take a VERY long time) when trying to find tower or tower:8080. So I thought I might restart it and see if that helped any. Upon restart it began a parity check that is giving me TONS of errors on drive4 50k+ with 37% done, its also going slow on the check 20mb/s instead of the normal 45-47mb/s. The server is still working fine but I don't understand whats going on with that drive. The drive in question is a 1tb WD green EAV drive. MB:C2SEE, just 6 drives 4 2tb EARs and 2 of the 1tb EAVS. unraid 4.7 Thanks, Brandon syslog-2011-04-23.zip
April 24, 201115 yr Looks more like a cabling problem to me. You really can't detect a bad drive from looking at the syslog. Pull a smart report for the drive and post it. BTW, the syslog is a .RAR archive, not a .ZIP file.
April 25, 201115 yr Author Statistics for /dev/sde 00D_WD-WCAU41457138 smartctl -a -d ata /dev/sde smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build) Copyright © 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green family Device Model: WDC WD10EAVS-00D7B0 Serial Number: WD-WCAU41457138 Firmware Version: 01.01A01 User Capacity: 1,000,203,804,160 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Apr 25 16:01:58 2011 MST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: (24000) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 163 161 021 Pre-fail Always - 6841 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 711 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 051 Old_age Always - 0 9 Power_On_Hours 0x0032 079 078 000 Old_age Always - 15912 10 Spin_Retry_Count 0x0032 100 100 051 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 051 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 250 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 5 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 711 194 Temperature_Celsius 0x0022 120 101 000 Old_age Always - 30 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 192 192 000 Old_age Always - 1327 198 Offline_Uncorrectable 0x0030 196 192 000 Old_age Offline - 741 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 175 001 051 Old_age Offline In_the_past 3386 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 90% 15871 513270 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
April 26, 201115 yr ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 192 192 000 Old_age Always - 1327 200 Multi_Zone_Error_Rate 0x0008 175 001 051 Old_age Offline In_the_past 3386 SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 90% 15871 513270 Drive looks bad. Interesting report though. 1327 pending and none marked bad. Your Multi_Zone_Error_Rate (standardized value) got down to 1 (threshold of failure is 51). I'd say RMA it.
Archived
This topic is now archived and is closed to further replies.