January 22, 20224 yr Currently I have a cache pool consisting of one 2.5' SSD and on onboard NVme drive. The 2.5' SSD is 500GB and the NVMe is 1TB. If I had to swap my motherboard. how would I break the cache of would I just leave it? Or would I move the contents of the cache to the array, then copy it back once the motherboard was completed? Assuming the replacement drive has an NVMe slot where I can install my 1TB drive.
January 23, 20224 yr I am not sure what the issue is. If your replacement board has a M.2 for your NVME and enough SATA for all your drives (or with an addon card), you plug them back on and they should be identified by their S/N and allocated by Unraid to the appropriate Pool. Like for any drive.
January 23, 20224 yr Author It's not an issue per se, I am just asking if I swap my motherboard. everything should remain the same, which it should, thanks.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.