January 23, 20224 yr Hi all, I've just installed a new trial, Version: 6.10.0-r2. Four drives are attached, and the HBA shows the drives during the boot sequence, but when I try to assign them, they do not show. I'm not sure what to do next, so any help would be greatly appreciated. Thanks in advance mrbup-diagnostics-20220123-1059.zip
January 23, 20224 yr Solution 01:00.0 RAID bus controller [0104]: Broadcom / LSI MegaRAID SAS 2008 [Falcon] [1000:0073] (rev 03) Subsystem: Dell PERC H310 [1028:1f78] Kernel modules: megaraid_sas You've got the controller set up in IR mode. You still have to tell the controller in IT's bios (CTRL-S IIRC) to either switch to JBOD or create 4x RAID pools composed of a single drive each. Since it's a Perc H310, you'll actually have by far the best results on Unraid (or any NAS) for that matter by cross flashing it to be the generic LSI HBA Lots of information on that in the internet (just search H310 crossflash to IT), and a rather long thread here https://forums.unraid.net/topic/12114-lsi-controller-fw-updates-irit-modes/
January 23, 20224 yr 10 minutes ago, Dextavier said: Unbelievably quick and helpful One of the benefits of working from home and having no life
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.