[Support] hyperion.ng


xenco

Recommended Posts

Application: hyperion.ng

Docker Hub: https://hub.docker.com/r/nq00/hyperion-ng

Github: https://github.com/xenco/hyperion-ng

Template: https://github.com/xenco/docker-templates/blob/main/xenco/hyperion.xml

Official Project Repo: https://github.com/hyperion-project/hyperion.ng

 

Hyperion is an opensource Bias or Ambient Lighting implementation which you might know from TV manufacturers. It supports many LED devices and video grabbers.

 

Installation requires no further adjustments. Just install using the defaults and configure the application using its web interface.

Link to comment
  • 2 weeks later...

Hi Xenco! Happy to see hyperion has made its way to CA apps, thanks for your contribution this is very exciting. Sadly I'm having some trouble with the container, the web UI isnt loading. Here is the only log entry I see. 

 

incorrect HTTP headers line : "5Ehidden%25253Db%2525253A1%255Eo%25253Aid%25253Dn%2525253A10%25255Ewidth%25253Dn%2525253A60%25255Ehidden%25253Db%2525253A1%255Eo%25253Aid%25253Dn%2525253A11%25255Ewidth%25253Dn%2525253A80%255Eo%25253Aid%25253Dn%2525253A12%25255Ewidth%25253Dn%2525253A80%25255Ehidden%25253Db%2525253A1%255Eo%25253Aid%25253Dn%2525253A13%25255Ewidth%25253Dn%2525253A80%25255Ehidden%25253Db%2525253A1%255Eo%25253Aid%25253Dn%2525253A14%25255Ewidth%25253Dn%2525253A120%25255Ehidden%25253Db%2525253A1%255Eo%25253Aid%25253Dn%2525253A15%25255Ewidth%25253Dn%2525253A120%25255Ehidden%25253Db%2525253A1%255Eo%25253Aid%25253Dn%2525253A16%25255Ewidth%25253Dn%2525253A104%25255Ehidden%25253Db%2525253A1%255Eo%25253Aid%25253Dn%2525253A17%25255Ewidth%25253Dn%2525253A80%25255Ehidden%25253Db%2525253A1%255Eo%25253Aid%25253Dn%2525253A18%25255Ewidth%25253Dn%2525253A80%25255Ehidden%25253Db%2525253A1%255Eo%25253Aid%25253Dn%2525253A19%25255Ewidth%25253Dn%2525253A75%25255Ehidden%25253Db%2525253A1%255Eo%25253Aid%25253Dn%2525253A20%25255Ewidth%25253Dn%2525253A75%25255Ehidden%25253Db%2525253A1%255Eo%25253Aid%25253Dn%2525253A21%25255Ewidth%25253Dn%2525253A75%25255Ehidden%25253Db%2525253A1%255Eo%25253Aid%25253Dn%2525253A22%25255Ewidth%25253Dn%2525253A75%25255Ehidden%25253Db%2525253A1%255Eo%25253Aid%25253Dn%2525253A23%25255Ewidth%25253Dn%2525253A75%25255Ehidden%25253Db%2525253A1%255Eo%25253Aid%25253Dn%2525253A24%25255Ewidth%25253Dn%2525253A75%25255Ehidden%25253Db%2525253A1%255Eo%25253Aid%25253Dn%2525253A25%25255Ewidth%25253Dn%2525253A75%25255Ehidden%25253Db%2525253A1%255Eo%25253Aid%25253Dn%2525253A26%25255Ewidth%25253Dn%2525253A100%5Esort%3Do%253Afield%253Ds%25253Atime_added%255Edirection%253Ds%25253ADESC; ca_startupButton=topperforming; unraid_c9fdc1d97e4eda4a7a923e079de6589a=69e7b7faa035f36c7dfddbc2fe0c5c49; ud_reload=UD_reload; ca_installMulti=false; ca_categoryName=undefined; ca_categoryText=Search%20for%20hyperion; ca_searchActive=true; ca_filter=hyperion; ca_data=%7B%22docker%22%3A%22%22%2C%22section%22%3A%22AppStore%22%2C%22selected_category%22%3A%22%22%2C%22subcategory%22%3A%22%22%2C%22selected_subcategory%22%3A%22%22%2C%22selected%22%3A%22%7B%5C%22docker%5C%22%3A%5B%5D%2C%5C%22plugin%5C%22%3A%5B%5D%2C%5C%22deletePaths%5C%22%3A%5B%5D%7D%22%2C%22lastUpdated%22%3A0%2C%22nextpage%22%3A0%2C%22prevpage%22%3A0%2C%22currentpage%22%3A1%2C%22searchFlag%22%3Atrue%2C%22searchActive%22%3Atrue%2C%22previousAppsSection%22%3A%22%22%2C%22searchInProgress%22%3Afalse%2C%22actions%22%3Afalse%2C%22sidebarapppath%22%3A%22%2Ftmp%2Fcommunity.applications%2FtempFiles%2Ftemplates-community-apps%2FxencosRepository%2Fnq00-hyperionng-latest.xml%22%2C%22sidebarappname%22%3A%22hyperion.ng%22%7D; ca_categories_enabled=%5B%5D; ca_selectedMenu=; sidebarAppPath=; sidebarAppName=\r\n"

 

Where should I look for more info or logs to try and track down the issue?

 

Thanks again

Link to comment

Hi Chumba,

 

I have the same errors in my log, no idea why. The webinterface (and everything else) works regardless.

 

Have you checked that the ports 8090 (http) and 8092 (https) are available and not in use by any other container?

 

While setting the docker up I encountered a similar problem. Please try to set network mode to host, apply and restart and after that change back to bridge.

 

Please let me know if that helped!

 

xenco

Link to comment
  • 4 months later...

I'm getting the same issue.

 

Nothing in the logs until i try to access the webUI, then i get Error : incorrect HTTP headers line

 

The ports are all available when checking the docker allocations. I've tried network mode as host and as bridge, same result.

 

Any ideas?

 

UPDATE: It appears to have been cookies issue of some sort, when attempting to access the webUI from my phone it works fine.

Edited by eatoff
Update
Link to comment
  • 2 months later...
  • 4 weeks later...
  • 1 month later...

I have had a few issues integrating my USB grabber to this Docker container. The correct path for my grabber is /dev/video0 and I have entered this in the config.  I believe there is a permissions issue as Hyperion is not able to find the Video source via it's WebGUI. If I switch the container into Privilege mode the application then works as expected. for security reasons I don't want to have Hyperion running in privilege mode. Is anyone able to help or have experience with this? 

Link to comment
13 hours ago, ishtangli said:

I got the docker and that's about it. Dont even know if I correctly passed the device and I cant recall the command I used.

on the config of the docker container pass the path /dev/video0 to /dev/video0 of the container. enable Privilege mode and see if your Hyperion WebGUI detects the USB grabber. this is just a test to see if it works. I would advise to disable Privilege mode again after testing.

Link to comment
56 minutes ago, ishtangli said:

I dont see a /dev/video0 on the host. Could it be because the grabber is being passed to a VM at the moment? I can see the device via USB bus though.

from what I understand that destination is effectively where the video is routed to. add that path in your container (by typing it, not from the drop down menu) with privilege mode on 

 

Link to comment
On 11/15/2022 at 10:37 PM, ishtangli said:

Read up a bit more on this and I need to install a plugin for video0 to work. No video drivers I think.

 

Anyhow, I'll probably wait for the "privileged" bug to be resolved before migrating my VM to docker.

I don’t believe it’s a bug. It’s my inability to get over the permissions setup. That’s why I put a post up so that someone with some knowledge could hopefully lend a helping hand.

Edited by CJC
Link to comment
  • 2 weeks later...
  • 1 month later...
On 2/6/2022 at 10:47 PM, Chumba said:

Hi Xenco! Happy to see hyperion has made its way to CA apps, thanks for your contribution this is very exciting. Sadly I'm having some trouble with the container, the web UI isnt loading. Here is the only log entry I see. 

 

incorrect HTTP headers line : "5Ehidden%25253Db%2525253A1%255Eo%25253Aid%25253Dn%2525253A10%25255Ewidth%25253Dn%2525253A60%25255Ehidden%25253Db%2525253A1%255Eo%25253Aid%25253Dn%2525253A11%25255Ewidth%25253Dn%2525253A80%255Eo%25253Aid%25253Dn%2525253A12%25255Ewidth%25253Dn%2525253A80%25255Ehidden%25253Db%2525253A1%255Eo%25253Aid%25253Dn%2525253A13%25255Ewidth%25253Dn%2525253A80%25255Ehidden%25253Db%2525253A1%255Eo%25253Aid%25253Dn%2525253A14%25255Ewidth%25253Dn%2525253A120%25255Ehidden%25253Db%2525253A1%255Eo%25253Aid%25253Dn%2525253A15%25255Ewidth%25253Dn%2525253A120%25255Ehidden%25253Db%2525253A1%255Eo%25253Aid%25253Dn%2525253A16%25255Ewidth%25253Dn%2525253A104%25255Ehidden%25253Db%2525253A1%255Eo%25253Aid%25253Dn%2525253A17%25255Ewidth%25253Dn%2525253A80%25255Ehidden%25253Db%2525253A1%255Eo%25253Aid%25253Dn%2525253A18%25255Ewidth%25253Dn%2525253A80%25255Ehidden%25253Db%2525253A1%255Eo%25253Aid%25253Dn%2525253A19%25255Ewidth%25253Dn%2525253A75%25255Ehidden%25253Db%2525253A1%255Eo%25253Aid%25253Dn%2525253A20%25255Ewidth%25253Dn%2525253A75%25255Ehidden%25253Db%2525253A1%255Eo%25253Aid%25253Dn%2525253A21%25255Ewidth%25253Dn%2525253A75%25255Ehidden%25253Db%2525253A1%255Eo%25253Aid%25253Dn%2525253A22%25255Ewidth%25253Dn%2525253A75%25255Ehidden%25253Db%2525253A1%255Eo%25253Aid%25253Dn%2525253A23%25255Ewidth%25253Dn%2525253A75%25255Ehidden%25253Db%2525253A1%255Eo%25253Aid%25253Dn%2525253A24%25255Ewidth%25253Dn%2525253A75%25255Ehidden%25253Db%2525253A1%255Eo%25253Aid%25253Dn%2525253A25%25255Ewidth%25253Dn%2525253A75%25255Ehidden%25253Db%2525253A1%255Eo%25253Aid%25253Dn%2525253A26%25255Ewidth%25253Dn%2525253A100%5Esort%3Do%253Afield%253Ds%25253Atime_added%255Edirection%253Ds%25253ADESC; ca_startupButton=topperforming; unraid_c9fdc1d97e4eda4a7a923e079de6589a=69e7b7faa035f36c7dfddbc2fe0c5c49; ud_reload=UD_reload; ca_installMulti=false; ca_categoryName=undefined; ca_categoryText=Search%20for%20hyperion; ca_searchActive=true; ca_filter=hyperion; ca_data=%7B%22docker%22%3A%22%22%2C%22section%22%3A%22AppStore%22%2C%22selected_category%22%3A%22%22%2C%22subcategory%22%3A%22%22%2C%22selected_subcategory%22%3A%22%22%2C%22selected%22%3A%22%7B%5C%22docker%5C%22%3A%5B%5D%2C%5C%22plugin%5C%22%3A%5B%5D%2C%5C%22deletePaths%5C%22%3A%5B%5D%7D%22%2C%22lastUpdated%22%3A0%2C%22nextpage%22%3A0%2C%22prevpage%22%3A0%2C%22currentpage%22%3A1%2C%22searchFlag%22%3Atrue%2C%22searchActive%22%3Atrue%2C%22previousAppsSection%22%3A%22%22%2C%22searchInProgress%22%3Afalse%2C%22actions%22%3Afalse%2C%22sidebarapppath%22%3A%22%2Ftmp%2Fcommunity.applications%2FtempFiles%2Ftemplates-community-apps%2FxencosRepository%2Fnq00-hyperionng-latest.xml%22%2C%22sidebarappname%22%3A%22hyperion.ng%22%7D; ca_categories_enabled=%5B%5D; ca_selectedMenu=; sidebarAppPath=; sidebarAppName=\r\n"

 

Where should I look for more info or logs to try and track down the issue?

 

Thanks again

 

Hey everyone, has someone managed to solve this issue? 

 

I have access to the WEB UI and I just set up android grabber on my TV. Unfortunately, the led strip doesn't work when starting the ambilight and I get this error message in the logs.... No idea what to do now :(

Link to comment
  • 2 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.