January 28, 20224 yr Hoping somebody can help me out here. I can reach my unRaid files by a link to the contents, but I can't access the login screen to perform housekeeping chores and activities. I'm accessing it via the url bar: <server_name>/login All I get is: Hmmm… can't reach this page Check if there is a typo in fred. If spelling is correct, try running Windows Network Diagnostics. DNS_PROBE_FINISHED_NXDOMAIN I've tried changing settings but I'm not having any luck. Can anybody help?
January 28, 20224 yr Can you reach it via using the IP address? https://ipAddress (NOTE: you must actually enter in https)
January 29, 20224 yr Author I enter in http://fred/login I get the following... Hmmm… can't reach this page Check if there is a typo in fred. Search Bing for fred If spelling is correct, try running Windows Network Diagnostics. DNS_PROBE_FINISHED_NXDOMAIN It seems to recognize "fred" (the name of the server) but not login. (I've also tried logon) I have a bookmark for this that used to work. but no longer.
January 29, 20224 yr Community Expert 1 minute ago, jbbrandes said: I enter in http://fred/login I get the following... Hmmm… can't reach this page Check if there is a typo in fred. Search Bing for fred If spelling is correct, try running Windows Network Diagnostics. DNS_PROBE_FINISHED_NXDOMAIN It seems to recognize "fred" (the name of the server) but not login. (I've also tried logon) I have a bookmark for this that used to work. but no longer. Does it work if you omit the ‘login’ part? It should not be necessary.
January 29, 20224 yr 4 minutes ago, jbbrandes said: I enter in http://fred/login On 1/28/2022 at 5:05 AM, Squid said: Can you reach it via using the IP address? https://ipAddress (NOTE: you must actually enter in https) (and accept the certificate warning that will result)
January 29, 20224 yr Author Omitting "login" yields the same result. I just want to make sure I'm clear about the problem. I am able to access the contents/file system of the server of the server. I am not able to connect to the server via login so that I can access the dashboard and perform system administrative and housekeeping functions. (parity checking, updating packages, etc) -John
January 29, 20224 yr Author http://192.168.0.13 yields the following result. Hmmm… can't reach this page 192.168.0.13 refused to connect. Try: Checking the connection Checking the proxy and the firewall ERR_CONNECTION_REFUSED Hide details Check your Internet connection Check your network cables, modem, and routers. Allow Microsoft Edge to access the network in your firewall or antivirus settings. If it's already listed as a program allowed to access the network, try removing it from the list, and adding it again. If you use a proxy server: Check your proxy settings. You might need to ask your organization if the proxy server is working. If you don't think you should be using a proxy server, go to Settings > System > Open your computer's proxy settings
January 29, 20224 yr Just now, jbbrandes said: http://192.168.0.13 On 1/28/2022 at 5:05 AM, Squid said: Can you reach it via using the IP address? https://ipAddress (NOTE: you must actually enter in https) I can't tell if you just typed it wrong in the message or not. Try https
January 29, 20224 yr Author sorry, I typed too fast, I entered as follows... https://192.168.0.13 and got the message as above. Im looking in the firewall and don't see anything wrong.
January 29, 20224 yr OK. Just what I was looking for happened to be one common cause for inability to connect Do you have a keyboard / mouse attached to the server? Can you log in at the command prompt and then enter in diagnostics The zip file will get saved onto the flash drive (logs folder) Powerdown, pull the flash drive and post the the zip here powerdown
January 29, 20224 yr Author I'm copying some files now, but once done I can do that, On a side note, I'm finally able to access the logon screen by typing http://198.162.0.13/login It just started working all of a sudden. I don't know why http://fred/login https://fred/login http://192.168.0.13/login https://192.168.0.13/login https://192.168.0.13 or any of the others still don't work. I'm at a loss to explain any of this.
January 29, 20224 yr Author You want me to run "diagnostics" from a linux command prompt, correct? I'll have to power down and power up with a head attached to do this.
January 29, 20224 yr Yes. If you've now got access to the WebUI, it's easier from Tools - Diagnostics
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.