January 28, 20224 yr I shut down my unraid server and after switching it on again it did not boot. After trying all kind of things regarding to several forum posts I plugged the USB drive into my Windows machine to save the latest config. Problem: Windows can't open / access the stick and in MacOS the stick does not show up either. While I can create a new stick I only have a config backup from some time ago and after that I added another drive to the pool and deleted to old iscsi apps. I am not sure how to go on. Some advice would be great.
January 28, 20224 yr The MyServers plugin is awesome for keeping backups up to date, even if you don't use it's remote access features Without any current backup, what you're going to have to do is assign every drive (except what's obviously a cache drive) to the array as a data drive. If you only had 1 parity drive, 1 drive will come up as unmountable. If you had 2 drives, 2 will come up as unmountable If you have more drives come up as unmountable than you had parity disks, then stop whatever you're doing and post your diagnostics. Tools - New Config and then assign the drives accordingly Your existing docker containers should come up as normally, but without the templates you won't be able to edit them (or reinstall them) until such time as you get around to recreating the paths / ports you've had assigned to them (The docker tab will basically give you most of the information you need to recreate)
January 29, 20224 yr Author Boots again with new usb drive but LSI HBA and all drives are gone... Sigh... Probably the HBA was fried... No luck with (re)assigning drives.
January 29, 20224 yr Author Seems the whole controller is not detected. Controller Bios is not showing up in boot process. I attached the diagnostics. diagnostics-20220129-1035.zip
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.