February 5, 20224 yr All my temps sensors show up, but none of my fans. Motherboard is MSI MAG Z590 Torpedo Tried different solution, but the result is the same.. Any suggestion on how to get this working? #----cut here---- # Chip drivers modprobe coretemp modprobe nct6683 /usr/bin/sensors -s #----cut here---- # sensors nvme-pci-0600 Adapter: PCI adapter Composite: +47.9°C (low = -273.1°C, high = +81.8°C) (crit = +84.8°C) Sensor 1: +47.9°C (low = -273.1°C, high = +65261.8°C) Sensor 2: +53.9°C (low = -273.1°C, high = +65261.8°C) acpitz-acpi-0 Adapter: ACPI interface MB Temp: +27.8°C (crit = +105.0°C) coretemp-isa-0000 Adapter: ISA adapter CPU Temp: +58.0°C (high = +100.0°C, crit = +100.0°C) Core 0: +50.0°C (high = +100.0°C, crit = +100.0°C) Core 1: +48.0°C (high = +100.0°C, crit = +100.0°C) Core 2: +51.0°C (high = +100.0°C, crit = +100.0°C) Core 3: +50.0°C (high = +100.0°C, crit = +100.0°C) Core 4: +58.0°C (high = +100.0°C, crit = +100.0°C) Core 5: +50.0°C (high = +100.0°C, crit = +100.0°C) nvme-pci-0100 Adapter: PCI adapter Composite: +51.9°C (low = -273.1°C, high = +81.8°C) (crit = +84.8°C) Sensor 1: +51.9°C (low = -273.1°C, high = +65261.8°C) Sensor 2: +58.9°C (low = -273.1°C, high = +65261.8°C) MD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 16h thermal sensors... No AMD Family 17h thermal sensors... No AMD Family 15h power sensors... No AMD Family 16h power sensors... No Hygon Family 18h thermal sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No Intel 5500/5520/X58 thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): y Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... Yes Found `Nuvoton NCT6687D eSIO' Success! (address 0xa20, driver `nct6683') Edited February 5, 20224 yr by ProphetSe7en
February 5, 20224 yr Author So I made some kind of progress. Updated to 6.10.0.RC2 Temp sensors are available, but no pwm controller. I then ran modprobe nct6683 force=1 and now I can see all the pwm controller. After restart I have to run modprobe nct6683 force=1 again for them to show up. Is there any way to force this during boot? I tried adding echo "options nct6683 force=1" >> /etc/modprobe.d/sensors.conf to the go file, but still same issue after restart Anyway. Whit the drives loaded I get a new issue with permission denied <br /><b>Warning</b>: file_get_contents(/sys/devices/platform/nct6683.2592/hwmon/hwmon4/pwm4_enable): failed to open stream: No such file or directory in <b>/usr/local/emhttp/plugins/dynamix.system.autofan/include/SystemFan.php</b> on line <b>40</b><br /><br /><b>Warning</b>: file_put_contents(/sys/devices/platform/nct6683.2592/hwmon/hwmon4/pwm4_enable): failed to open stream: Permission denied in <b>/usr/local/emhttp/plugins/dynamix.system.autofan/include/SystemFan.php</b> on line <b>42</b><br /><br /><b>Warning</b>: file_put_contents(/sys/devices/platform/nct6683.2592/hwmon/hwmon4/pwm4): failed to open stream: Permission denied in <b>/usr/local/emhttp/plugins/dynamix.system.autofan/include/SystemFan.php</b> on line <b>43</b><br /><br /><b>Warning</b>: file_put_contents(/sys/devices/platform/nct6683.2592/hwmon/hwmon4/pwm4): failed to open stream: Permission denied in <b>/usr/local/emhttp/plugins/dynamix.system.autofan/include/SystemFan.php</b> on line <b>46</b><br /><br /><b>Warning</b>: file_put_contents(/sys/devices/platform/nct6683.2592/hwmon/hwmon4/pwm4): failed to open stream: Permission denied in <b>/usr/local/emhttp/plugins/dynamix.system.autofan/include/SystemFan.php</b> on line <b>49</b><br /><br /><b>Warning</b>: file_put_contents(/sys/devices/platform/nct6683.2592/hwmon/hwmon4/pwm4_enable): failed to open stream: Permission denied in <b>/usr/local/emhttp/plugins/dynamix.system.autofan/include/SystemFan.php</b> on line <b>50</b><br />/sys/devices/platform/nct6683.2592/hwmon/hwmon4/fan1_input I also get the permission denied running pwmconfig Found the following PWM controls: hwmon4/pwm1 current value: 33 /usr/sbin/pwmconfig: line 180: hwmon4/pwm1: Permission denied hwmon4/pwm2 current value: 255 /usr/sbin/pwmconfig: line 180: hwmon4/pwm2: Permission denied hwmon4/pwm3 current value: 153 /usr/sbin/pwmconfig: line 180: hwmon4/pwm3: Permission denied hwmon4/pwm4 current value: 153 /usr/sbin/pwmconfig: line 180: hwmon4/pwm4: Permission denied hwmon4/pwm5 current value: 153 /usr/sbin/pwmconfig: line 180: hwmon4/pwm5: Permission denied hwmon4/pwm6 current value: 153 /usr/sbin/pwmconfig: line 180: hwmon4/pwm6: Permission denied hwmon4/pwm7 current value: 153 /usr/sbin/pwmconfig: line 180: hwmon4/pwm7: Permission denied hwmon4/pwm8 current value: 153 /usr/sbin/pwmconfig: line 180: hwmon4/pwm8: Permission denied No clue on what to do next
September 19, 20223 yr Author On 8/31/2022 at 7:54 PM, wdnaser said: I also encountered the same problem My MB:PRO Z690-A WIFI DDR4(MS-7D25) I had to install the Nuvoton NCT6687 Driver plugin
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.