Crashed when finishing a pre=clear, frequent recent crashes


mikesp18

Recommended Posts

I went to bed last night around 10pm and a preclear was running and due to finish on a new drive this AM.  When I checked this AM, the GUI had crashed.  Putty didn't work.  The keyboard and monitor directly attached to the system didn't do anything.  Lights were on.  Nobody home.  I ended up doing a hard reset and I'm running ANOTHER parity check, which is getting annoying.

 

I had syslog mirroring to flash, so I'll attach that and the diagnostics.  Obviously I couldn't get the diagnostics until I reset the server.

 

Any help is appreciated.

 

I notice the logs stop around 5:20am, and then no new entries until I hard reset the system after work around 19:25.

 

orcrist-diagnostics-20220209-2005.zip

orcrist-syslog-20220210-0304.zip

Link to comment
6 hours ago, mikesp18 said:

I read through it and not sire what I can do about it.

You can disable loading the i915 driver, but since the current log has this:

 

Feb 13 00:03:25 Orcrist kernel: macvlan_broadcast+0x10e/0x13c [macvlan]
Feb 13 00:03:25 Orcrist kernel: macvlan_process_broadcast+0xf8/0x143 [macvlan]

 

The problem is likely this one:

 

Macvlan call traces are usually the result of having dockers with a custom IP address, upgrading to v6.10 and switching to ipvlan might fix it (Settings -> Docker Settings -> Docker custom network type -> ipvlan (advanced view must be enable, top right)), or see below for more info.

https://forums.unraid.net/topic/70529-650-call-traces-when-assigning-ip-address-to-docker-containers/

See also here:

https://forums.unraid.net/bug-reports/stable-releases/690691-kernel-panic-due-to-netfilter-nf_nat_setup_info-docker-static-ip-macvlan-r1356/

 

 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.