February 18, 20224 yr so one of my drive has 3281 errors on it and every day it says failed health check. i ran a parity check and it came back with 0 errors, then a smart check on the drive also fine (it is an old 3TB though). I've bought 2 new 4TB drives to change it out and replace the other 3TB. what should i do before swapping the drives and is there a best way of doing it or just pull drives and let it rebuild? soos-diagnostics-20220218-0907.zip
February 18, 20224 yr 10 minutes ago, MMChris said: so one of my drive has 3281 errors on it and every day it says failed health check. Your disk5 is really not great. Serial Number: WD-WMC4N1343172 ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 1022 3 Spin_Up_Time POS--K 178 175 021 - 6058 4 Start_Stop_Count -O--CK 100 100 000 - 419 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 056 056 000 - 32724 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 69 192 Power-Off_Retract_Count -O--CK 200 200 000 - 42 193 Load_Cycle_Count -O--CK 001 001 000 - 955420 194 Temperature_Celsius -O---K 131 104 000 - 19 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 303 12 minutes ago, MMChris said: what should i do before swapping the drives and is there a best way of doing it or just pull drives and let it rebuild? I would not waste time and replace it fast. My advice is rebuild on one of your new 4TB drive.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.