Skip to content
View in the app

A better way to browse. Learn more.

Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Unable to ping or traceroute to gateway

Featured Replies

So I've been dealing with several issue, I believe stem from a failing motherboard and or faulty boot media. I fixed the boot media and now the server starts without a kernel fault. I ran the Fix Common Problems Plug-in to see what issues I may still have and it reported bad DNS configuration. I checked that out and found I cannot ping or traceroute to my DNS/Gateway.  I can ping other machines on the same subnet. I can

 

PING 192.168.0.24 (192.168.0.24) 56(84) bytes of data.
64 bytes from 192.168.0.24: icmp_seq=1 ttl=128 time=0.155 ms
64 bytes from 192.168.0.24: icmp_seq=2 ttl=128 time=0.187 ms

 

Ping to the gateway

ping 192.168.0.1
PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data.
From 192.168.0.107 icmp_seq=10 Destination Host Unreachable

 

So that rules out cable issues,

 

The routes look ok

 

route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
default         192.168.0.1     0.0.0.0         UG    208    0        0 eth0
192.168.0.0     0.0.0.0         255.255.255.0   U     208    0        0 eth0

 

I did have bonding error reported but the network setting in the GUI did not show it, but the network.cfg did, so I reset the network.cfg. 

 

IFNAME[0]="eth0"
PROTOCOL[0]="ipv4"
USE_DHCP[0]="yes"
DHCP_KEEPRESOLV="yes"
DNS_SERVER1="8.8.8.8"
DNS_SERVER2="8.8.4.4"
USE_DHCP6[0]="yes"
DHCP6_KEEPRESOLV="no"
SYSNICS="1"

 

  • Author

OK so one other thing I just did changed the ip address to 192.168.0.66 as DHCP, Then everything works, I changed it back to a reserved .107 at it fails, again. I change it to .108 and it fails, change it to .66 and it works as a static address.  I have not made changes to my router so I am not sure what is going on.

Edited by dodgeman
More info

You are making these changes to reserved in your router? What is your subnet defined as? Have you tried setting IP fixed to .107 on the Unraid box?

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.