Helmonder Posted April 30, 2012 Share Posted April 30, 2012 Possible cosmetic error: Just added a disk into the array (precleared), disk was added and showed a "green ball" in the main menu, status was however shown as "unformatted". Based on the color legend I guess the color would need to be blue ? System has been running all day without any issues, all operational ! Link to comment
jumperalex Posted May 1, 2012 Share Posted May 1, 2012 Any chance to get some unmenu like system log highlighting? But with a twist: for those "errors" that are not actual errors, have an updatable list of known innocuous errors codes. Might need either wildcards to effectively capture all exceptions, or even regex. I think that is really the last feature I care about from unmenu that keeps me using it. Link to comment
jumperalex Posted May 1, 2012 Share Posted May 1, 2012 Oh yeah and add disk performance monitoring as well. Link to comment
jumperalex Posted May 1, 2012 Share Posted May 1, 2012 I got this error on UR-RC1 / SF-RC1 in the active streams page: Warning: parse_ini_file(/boot/config/hosts.cfg): failed to open stream: No such file or directory in /usr/local/emhttp/plugins/simpleFeatures/scripts/NamesList.php on line 37 Link to comment
speeding_ant Posted May 2, 2012 Author Share Posted May 2, 2012 I got this error on UR-RC1 / SF-RC1 in the active streams page: Warning: parse_ini_file(/boot/config/hosts.cfg): failed to open stream: No such file or directory in /usr/local/emhttp/plugins/simpleFeatures/scripts/NamesList.php on line 37 Small bug, add a user to the list of IP addresses in the "User Names" section of Active Streams. That will remove the error. Link to comment
Joe L. Posted May 2, 2012 Share Posted May 2, 2012 Any chance to get some unmenu like system log highlighting? But with a twist: for those "errors" that are not actual errors, have an updatable list of known innocuous errors codes. Might need either wildcards to effectively capture all exceptions, or even regex. I think that is really the last feature I care about from unmenu that keeps me using it. Just an FYI. unMENU does use regex expressions. The patterns matched are in syslog_match.conf and syslog_user_match.conf The second file will not exist unless you create it. It has the same format as syslog_match.conf. You can append and update your own unmenu/syslog_match.conf file or add new expressions to make them more approriate to your own motherboard and hardware. The set of expressions RobJ originally defined have done remarkably well over several generations of hardware. If someone with more modern hardware wants to contribute additional expressions to match, it will surely help. The EXACT SAME syslog_match.conf file can be used by simpleFeatures or any other syslog viewing plugin. (It would be a great starting point) Link to comment
jumperalex Posted May 2, 2012 Share Posted May 2, 2012 speeding_ant: sweet thanks Joe_L: great info. speeding_ant again: ... ok next "issue" it seems like cache_dirs is not starting. I never noticed until I remove it from my go script. so I i went to the settings page for folder caching, disabled, and enabled it and boom it shows up in my proc list. but it shows up weird like this: /bin/bash /usr/local/sbin/cache_dirs -w -B -m1 -M10 -d9999 -e*My_Music* notice that the switches don't have spaces ... shouldn't they have spaces like this? /bin/bash /usr/local/sbin/cache_dirs -w -B -m 1 -M 10 -d 9999 -e *My_Music* am I missing something? Link to comment
jumperalex Posted May 2, 2012 Share Posted May 2, 2012 might have found the problem. so I changed all settings in the folder cache page, applied, then changed them back, applied, rebooted, and 1) cache_dirs is now in my proc list and 2) it looks "right" not sure when or where it went wrong though. I have a backup of the flash drive so I'll go back later tonight and see if I can compare the .cfg files between then and now. Link to comment
speeding_ant Posted May 2, 2012 Author Share Posted May 2, 2012 might have found the problem. so I changed all settings in the folder cache page, applied, then changed them back, applied, rebooted, and 1) cache_dirs is now in my proc list and 2) it looks "right" not sure when or where it went wrong though. I have a backup of the flash drive so I'll go back later tonight and see if I can compare the .cfg files between then and now. Cheers for looking into that - will await your prognosis! Link to comment
Joe L. Posted May 2, 2012 Share Posted May 2, 2012 might have found the problem. so I changed all settings in the folder cache page, applied, then changed them back, applied, rebooted, and 1) cache_dirs is now in my proc list and 2) it looks "right" not sure when or where it went wrong though. I have a backup of the flash drive so I'll go back later tonight and see if I can compare the .cfg files between then and now. Cheers for looking into that - will await your prognosis! I noticed in your plugin you are not stopping the cache_dirs prior to the array un-mounting disks. Could be you are then attempting to start a second, or get it confused with the "lock" file it creates. You should use the -B option and invoke the rc.whatever stop in the un-mount event handler. Link to comment
bonienl Posted May 2, 2012 Share Posted May 2, 2012 I got this error on UR-RC1 / SF-RC1 in the active streams page: Warning: parse_ini_file(/boot/config/hosts.cfg): failed to open stream: No such file or directory in /usr/local/emhttp/plugins/simpleFeatures/scripts/NamesList.php on line 37 Small bug, add a user to the list of IP addresses in the "User Names" section of Active Streams. That will remove the error. I corrected this in the next version (warning may occur both in NamesList.php and UsersList.php). Though the script is working fine when the file "hosts.cfg" does not exist. Link to comment
bonienl Posted May 2, 2012 Share Posted May 2, 2012 might have found the problem. so I changed all settings in the folder cache page, applied, then changed them back, applied, rebooted, and 1) cache_dirs is now in my proc list and 2) it looks "right" not sure when or where it went wrong though. I have a backup of the flash drive so I'll go back later tonight and see if I can compare the .cfg files between then and now. Cheers for looking into that - will await your prognosis! In a next version I have added a status indicator showing the current state of the process. This will give a visual feedback. Ps. The same is done for s3_sleep and the parity scheduler. Link to comment
bonienl Posted May 2, 2012 Share Posted May 2, 2012 I noticed in your plugin you are not stopping the cache_dirs prior to the array un-mounting disks. Could be you are then attempting to start a second, or get it confused with the "lock" file it creates. You should use the -B option and invoke the rc.whatever stop in the un-mount event handler. Can you further elaborate? Thanks. Link to comment
kricker Posted May 2, 2012 Share Posted May 2, 2012 Would it be possible to add a feature to the sleep feature? I need to restart Sickbeard after resuming from sleep. It tries to connect to the net before the NIC is re-established. It thinks it is offline and then just keeps generating connection errors. In the past I had this added to my post_sleep_activity section: #Restart sickbeard sleep 60 echo Restarting SickBeard wget -q --delete-after http://192.168.0.100:8181/api/my_api_#/?cmd=sb.restart sleep 5 Would it be possible to add in the sleep settings custom commands to run after resuming from sleep and maybe one also for before going to sleep? Link to comment
bonienl Posted May 2, 2012 Share Posted May 2, 2012 You can always modify the s3_sleep script and put your specific commands in the appropriate pre-sleep and post-sleep routines Link to comment
kricker Posted May 2, 2012 Share Posted May 2, 2012 That is what I did currently. I added it into the package file and also copied it to user/local/sbin. Link to comment
speeding_ant Posted May 2, 2012 Author Share Posted May 2, 2012 I'd quite like to see that too :-) We could see if its possible? Link to comment
bonienl Posted May 2, 2012 Share Posted May 2, 2012 Nothing is impossible... if only time permits Link to comment
speeding_ant Posted May 2, 2012 Author Share Posted May 2, 2012 Nothing is impossible... if only time permits Too true Link to comment
jumperalex Posted May 3, 2012 Share Posted May 3, 2012 and money ... but to really complete the mantra: Fast Cheap Good Pick two Link to comment
tyrindor Posted May 6, 2012 Share Posted May 6, 2012 This addon (or whatever we want to call it) is the single greatest thing that has happened to unRAID. Been using it for about half a year now, and every time it updates I get more and more impressed. This really is how the default unRAID should of been. So many settings that should be on the default UI. Link to comment
caimakale Posted May 6, 2012 Share Posted May 6, 2012 One more feature request for the active streams add-on (when time permits of course). Can you add a third tab that shows the history of streams? It would be nice if the info on the active streams tab could be added to a log file and displayed with a time stamp on a new "history" tab. Paginate the history with 20 results per page (or something similar) and add a "clear history" option to allow us to delete the logs. To ensure the logs don't get filled up because people are unaware or don't check often enough, this could be tied in with the notification script. Link to comment
_vern_ Posted May 6, 2012 Share Posted May 6, 2012 First, I'll admit I haven't read all 62 pages in this thread...phew! So, this may have already been touched on, not sure. I really like the plugin, great stuff! I like the Stats page and the graphs, but I wanted to ask about how the memory usage is represented. Currently it appears that it shows memory usage "used" and "free" as it is shown in the Top command for "used"and "free". If my assertion is true, then that isn't really an accurate representation and would lead people to believe that they may be having a memory leak because over time the graph may show that all the memory is used. That's what I started seeing and I only have 1 GB RAM, so I was concerned. But after running the command "free -m", which subtracts the buffers and adds in the cache I then could see that only about 6% of my memory was being used because the majority of it is being reserved for disk caching, but of course is still free for applications to use. So, my question is, would it make sense to have the graph represent what "free -m" shows as this would be more in line with what is really "used" and "free". Thanx, Link to comment
Recommended Posts