"SimpleFeatures" Plugin - Version 1.0.11



Recommended Posts

The second time you stop unRaid and restart is not necessary, but it made a flaw in the sleep package apparent.

 

The files postRun and preRun are stored in RAM and not automatically rebuild after a restart. Re-applying the sleep settings as you did, made the construction of the file(s).

 

The settings are all stored in a configuration file on the flash memory, I will need to add the logic to reconstruct the pre/post files from there...

Well I'm glad my useless steps at least helped find a bug. For now, If I reboot unRaid, I'll just be sure I go back and apply the commands.
Link to comment
  • Replies 2.8k
  • Created
  • Last Reply

Top Posters In This Topic

Hi, one  "bug" I have seen long time ago,

 

When browsing syslog, the page always refresh, so its impossible to go down in the syslog.

 

Page Refresh Interval: = disable

 

 

//Peter

I don't have this behaviour and browsing the syslog works as expected (doing that a lot lately).

 

What browser are you using (or did you try with different browsers & cache cleared) ?

Link to comment

When I go to syslog see skärmklipp3.jpg

 

When I go to main page, see skärmklipp4.jpg

 

Lots of activities on skärmklipp3.jpg.....

 

 

Below is from top command when trying to brows the syslog when page is reloading almost every seconds!

 

 

 

top - 21:08:16 up  4:11,  1 user,  load average: 3.50, 2.59, 2.32
Tasks: 102 total,   2 running, 100 sleeping,   0 stopped,   0 zombie
Cpu(s): 34.1%us, 11.8%sy,  0.0%ni, 54.0%id,  0.0%wa,  0.0%hi,  0.2%si,  0.0%st
Mem:   4016944k total,   819472k used,  3197472k free,    39300k buffers
Swap:        0k total,        0k used,        0k free,   665820k cached

  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
11980 root      20   0 53892 1584 1172 S    3  0.0   1:23.95 emhttp
12195 root      20   0 39168 1064  544 S    2  0.0   1:04.58 shfs
29404 root      20   0 14876 6120 3596 R    2  0.2   0:00.07 php
    3 root      20   0     0    0    0 S    0  0.0   0:01.96 ksoftirqd/0
17668 root      20   0     0    0    0 S    0  0.0   0:00.78 kworker/0:1
17708 root      20   0     0    0    0 S    0  0.0   0:00.85 kworker/0:4
17918 root      20   0     0    0    0 S    0  0.0   0:00.32 ksoftirqd/1
17949 root      20   0     0    0    0 S    0  0.0   0:00.57 kworker/1:0
32746 root      20   0     0    0    0 S    0  0.0   0:00.68 kworker/0:2
    1 root      20   0   828  308  264 S    0  0.0   0:05.34 init
    2 root      20   0     0    0    0 S    0  0.0   0:00.00 kthreadd
    6 root      RT   0     0    0    0 S    0  0.0   0:00.00 migration/0
   11 root       0 -20     0    0    0 S    0  0.0   0:00.00 khelper
  145 root      20   0     0    0    0 S    0  0.0   0:00.02 sync_supers
  147 root      20   0     0    0    0 S    0  0.0   0:00.00 bdi-default
  149 root       0 -20     0    0    0 S    0  0.0   0:00.00 kblockd
  254 root       0 -20     0    0    0 S    0  0.0   0:00.00 ata_sff
  264 root      20   0     0    0    0 S    0  0.0   0:00.00 khubd
  369 root       0 -20     0    0    0 S    0  0.0   0:00.00 rpciod
  399 root      20   0     0    0    0 S    0  0.0   0:00.00 kswapd0
  459 root      20   0     0    0    0 S    0  0.0   0:00.00 fsnotify_mark
  478 root       0 -20     0    0    0 S    0  0.0   0:00.00 nfsiod
  486 root       0 -20     0    0    0 S    0  0.0   0:00.00 crypto
  658 root      16  -4  2508 1060  496 S    0  0.0   0:00.03 udevd
  864 root      20   0     0    0    0 S    0  0.0   0:00.00 scsi_eh_0
  865 root      20   0     0    0    0 S    0  0.0   0:00.00 scsi_eh_1
  866 root      20   0     0    0    0 S    0  0.0   0:00.00 scsi_eh_2
  869 root      20   0     0    0    0 S    0  0.0   0:00.00 scsi_eh_3
  870 root      20   0     0    0    0 S    0  0.0   0:00.00 scsi_eh_4
  871 root      20   0     0    0    0 S    0  0.0   0:00.00 scsi_eh_5
  886 root      20   0     0    0    0 S    0  0.0   0:00.00 scsi_eh_6
  887 root      20   0     0    0    0 S    0  0.0   0:00.05 usb-storage
  897 root      20   0     0    0    0 S    0  0.0   0:00.00 scsi_eh_7
  898 root      20   0     0    0    0 S    0  0.0   0:00.00 scsi_eh_8
  899 root      20   0     0    0    0 S    0  0.0   0:00.00 scsi_eh_9
  900 root      20   0     0    0    0 S    0  0.0   0:00.00 scsi_eh_10
  901 root      20   0     0    0    0 S    0  0.0   0:00.00 scsi_eh_11
  902 root      20   0     0    0    0 S    0  0.0   0:00.00 scsi_eh_12
1089 root      20   0  1908  608  524 S    0  0.0   0:00.02 syslogd
1093 root      20   0  1856  384  320 S    0  0.0   0:00.00 klogd
1119 root      20   0  2044  592  484 S    0  0.0   0:00.00 dhcpcd
1204 bin       20   0  1960  476  396 S    0  0.0   0:00.00 rpc.portmap
1208 root      20   0  2108  784  660 S    0  0.0   0:00.00 rpc.statd
1218 root      20   0  1900  540  468 S    0  0.0   0:00.00 inetd
1225 root      20   0  8160 2700 2060 S    0  0.1   0:00.22 ntpd
1233 root      20   0  1864  628  536 S    0  0.0   0:00.00 acpid
1243 messageb  20   0  2476  612  460 S    0  0.0   0:00.00 dbus-daemon
1248 root      20   0  1908  604  504 S    0  0.0   0:00.01 crond
1250 daemon    20   0  1900  292  220 S    0  0.0   0:00.00 atd
4934 root      20   0 18848  704  536 S    0  0.0   0:00.23 apcupsd
5474 root      20   0 59308 3368 2620 S    0  0.1   0:01.17 hamachid
11646 root      20   0     0    0    0 S    0  0.0   0:00.00 flush-8:0
11647 root      20   0     0    0    0 S    0  0.0   0:00.00 flush-8:32
11986 root      20   0     0    0    0 S    0  0.0   0:00.00 mdrecoveryd

 

And my ps -ef during reloading syslog page.....

 

 

root@tower:~# ps -ef
UID        PID  PPID  C STIME TTY          TIME CMD
root         1     0  0 16:56 ?        00:00:05 init
root         2     0  0 16:56 ?        00:00:00 [kthreadd]
root         3     2  0 16:56 ?        00:00:02 [ksoftirqd/0]
root         6     2  0 16:56 ?        00:00:00 [migration/0]
root        11     2  0 16:56 ?        00:00:00 [khelper]
root       145     2  0 16:56 ?        00:00:00 [sync_supers]
root       147     2  0 16:56 ?        00:00:00 [bdi-default]
root       149     2  0 16:56 ?        00:00:00 [kblockd]
root       254     2  0 16:56 ?        00:00:00 [ata_sff]
root       264     2  0 16:56 ?        00:00:00 [khubd]
root       369     2  0 16:56 ?        00:00:00 [rpciod]
root       399     2  0 16:56 ?        00:00:00 [kswapd0]
root       459     2  0 16:56 ?        00:00:00 [fsnotify_mark]
root       478     2  0 16:56 ?        00:00:00 [nfsiod]
root       486     2  0 16:56 ?        00:00:00 [crypto]
root       658     1  0 16:56 ?        00:00:00 /sbin/udevd --daemon
root       864     2  0 16:56 ?        00:00:00 [scsi_eh_0]
root       865     2  0 16:56 ?        00:00:00 [scsi_eh_1]
root       866     2  0 16:56 ?        00:00:00 [scsi_eh_2]
root       869     2  0 16:56 ?        00:00:00 [scsi_eh_3]
root       870     2  0 16:56 ?        00:00:00 [scsi_eh_4]
root       871     2  0 16:56 ?        00:00:00 [scsi_eh_5]
root       886     2  0 16:56 ?        00:00:00 [scsi_eh_6]
root       887     2  0 16:56 ?        00:00:00 [usb-storage]
root       897     2  0 16:56 ?        00:00:00 [scsi_eh_7]
root       898     2  0 16:56 ?        00:00:00 [scsi_eh_8]
root       899     2  0 16:56 ?        00:00:00 [scsi_eh_9]
root       900     2  0 16:56 ?        00:00:00 [scsi_eh_10]
root       901     2  0 16:56 ?        00:00:00 [scsi_eh_11]
root       902     2  0 16:56 ?        00:00:00 [scsi_eh_12]
root      1089     1  0 16:56 ?        00:00:00 /usr/sbin/syslogd -m0
root      1093     1  0 16:56 ?        00:00:00 /usr/sbin/klogd -c 3 -x
root      1119     1  0 16:56 ?        00:00:00 /sbin/dhcpcd -t 10 -h tower -C resolv.conf eth0
bin       1204     1  0 16:56 ?        00:00:00 /sbin/rpc.portmap
root      1208     1  0 16:56 ?        00:00:00 /sbin/rpc.statd
root      1218     1  0 16:56 ?        00:00:00 /usr/sbin/inetd
root      1225     1  0 16:56 ?        00:00:00 /usr/sbin/ntpd -g -p /var/run/ntpd.pid
root      1233     1  0 16:56 ?        00:00:00 /usr/sbin/acpid
81        1243     1  0 16:56 ?        00:00:00 /usr/bin/dbus-daemon --system
root      1248     1  0 16:56 ?        00:00:00 /usr/sbin/crond -l notice
daemon    1250     1  0 16:56 ?        00:00:00 /usr/sbin/atd -b 15 -l 1
root      2615 12303  0 21:09 ?        00:00:00 sleep 60
root      2843 12273  0 21:09 ?        00:00:00 sleep 8
root      3246 11980  0 21:09 ?        00:00:00 /usr/sbin/smartctl -n standby -A /dev/sdb
root      3247 11980  0 21:09 ?        00:00:00 [smartctl] <defunct>
root      3248 11980  0 21:09 ?        00:00:00 [smartctl] <defunct>
root      3249 11980  0 21:09 ?        00:00:00 [smartctl] <defunct>
root      3250 11980  0 21:09 ?        00:00:00 [smartctl] <defunct>
root      3251 11980  0 21:09 ?        00:00:00 [smartctl] <defunct>
root      3252 11980  0 21:09 ?        00:00:00 [smartctl] <defunct>
root      3253 11980  0 21:09 ?        00:00:00 /usr/sbin/smartctl -n standby -A /dev/sde
root      3254 11980  0 21:09 ?        00:00:00 [smartctl] <defunct>
root      3255 11980  0 21:09 ?        00:00:00 /usr/sbin/smartctl -n standby -A /dev/sda
root      3256 24518  0 21:09 pts/0    00:00:00 ps -ef
root      4934     1  0 16:56 ?        00:00:00 /sbin/apcupsd
root      5474     1  0 16:56 ?        00:00:01 /usr/local/logmein-hamachi/hamachid
root     11646     2  0 21:00 ?        00:00:00 [flush-8:0]
root     11647     2  0 21:00 ?        00:00:00 [flush-8:32]
root     11980     1  0 16:57 ?        00:01:26 /usr/local/sbin/emhttp
root     11986     2  0 16:57 ?        00:00:00 [mdrecoveryd]
root     11988     2  0 16:57 ?        00:00:00 [spinupd]
root     11989     2  0 16:57 ?        00:00:00 [spinupd]
root     11990     2  0 16:57 ?        00:00:00 [spinupd]
root     11991     2  0 16:57 ?        00:00:00 [spinupd]
root     11992     2  0 16:57 ?        00:00:00 [spinupd]
root     11993     2  0 16:57 ?        00:00:00 [spinupd]
root     11994     2  0 16:57 ?        00:00:00 [spinupd]
root     11995     2  0 16:57 ?        00:00:00 [spinupd]
root     11996     2  0 16:57 ?        00:00:00 [spinupd]
root     12018     1  0 16:57 ?        00:00:00 /usr/sbin/nmbd -D
root     12020     1  0 16:57 ?        00:00:00 /usr/sbin/smbd -D
avahi    12031     1  0 16:57 ?        00:00:00 avahi-daemon: running [tower.local]
avahi    12032 12031  0 16:57 ?        00:00:00 avahi-daemon: chroot helper
root     12033 12020  0 16:57 ?        00:00:00 /usr/sbin/smbd -D
root     12041     1  0 16:57 ?        00:00:00 /usr/sbin/avahi-dnsconfd -D
root     12075     2  0 16:57 ?        00:00:00 [unraidd]
root     12146     2  0 16:57 ?        00:00:00 [reiserfs]
root     12188     1  0 16:57 ?        00:00:00 /usr/local/sbin/shfs /mnt/user0 -disks 2097150 -o noatime,big_wr
root     12195     1  0 16:57 ?        00:01:06 /usr/local/sbin/shfs /mnt/user -disks 2097151 2000000 -o noatime
root     12212     1  0 16:57 ?        00:00:00 /bin/bash /boot/unmenu/uu
root     12213     1  0 16:57 ?        00:00:00 logger -tunmenu -plocal7.info -is
root     12217 12212  0 16:57 ?        00:00:00 awk -W re-interval -f ./unmenu.awk
root     12273     1  0 16:57 ?        00:00:04 /bin/bash /usr/local/sbin/cache_dirs -w -B -m 1 -M 10 -d 9999 -i
root     12303     1  0 16:57 ?        00:00:00 /bin/bash /usr/local/sbin/s3_sleep -a -m12 -t5 -eeth0 -i192.168.
root     12309     1  0 16:57 tty1     00:00:00 /sbin/agetty 38400 tty1 linux
root     12310     1  0 16:57 tty2     00:00:00 /sbin/agetty 38400 tty2 linux
root     12311     1  0 16:57 tty3     00:00:00 /sbin/agetty 38400 tty3 linux
root     12313     1  0 16:57 tty4     00:00:00 /sbin/agetty 38400 tty4 linux
root     12314     1  0 16:57 tty5     00:00:00 /sbin/agetty 38400 tty5 linux
root     12315     1  0 16:57 tty6     00:00:00 /sbin/agetty 38400 tty6 linux
root     12429     1  0 16:57 ?        00:00:00 /usr/sbin/cnid_metad
root     12432     1  0 16:57 ?        00:00:00 /usr/sbin/afpd
root     17668     2  0 18:36 ?        00:00:00 [kworker/0:1]
root     17708     2  0 18:36 ?        00:00:01 [kworker/0:4]
root     17916     2  0 20:46 ?        00:00:00 [migration/1]
root     17918     2  0 20:46 ?        00:00:00 [ksoftirqd/1]
root     17944     2  0 20:46 ?        00:00:00 [kworker/u:65]
root     17945     2  0 20:46 ?        00:00:00 [kworker/u:66]
root     17949     2  0 20:46 ?        00:00:00 [kworker/1:0]
root     17951     2  0 20:46 ?        00:00:00 [kworker/1:2]
root     17952     2  0 20:46 ?        00:00:00 [kworker/1:3]
root     17953   658  0 20:46 ?        00:00:00 /sbin/udevd --daemon
root     17954   658  0 20:46 ?        00:00:00 /sbin/udevd --daemon
root     20438     2  0 21:02 ?        00:00:00 [kworker/0:0]
root     21698     2  0 17:26 ?        00:00:04 [kworker/0:3]
root     24517  1218  0 20:49 ?        00:00:00 in.telnetd: 192.168.0.188
root     24518 24517  0 20:49 pts/0    00:00:00 -bash
root     27024     2  0 21:07 ?        00:00:00 [kworker/1:4]
root     32477     2  0 20:57 ?        00:00:00 [kworker/1:1]
root     32746     2  0 20:57 ?        00:00:00 [kworker/0:2]

SkArmklipp3.JPG.4445334ba3bec0ec6df9f2b39850ef80.JPG

SkArmklipp4.JPG.dfdbd8705a8761081992efe6bcc2cb96.JPG

Link to comment

Both on Chrome, FF and windows explorer, always relead page when I checking my syslog... :-(

I use the same browsers (in different order), but never get a reload of the page unless the refresh timer is activated.

 

Did you try the stock GUI and see if the same thing happens?

 

Under the hood the original script for displaying the syslog is called, there are no modificiations on that part. Only the css coding has been adapted for a revised look.

Link to comment

It's working fine browsing syslog from unmenu  ;)

 

 

there are lots of kworker process going on when try browse syslog from simplefeatures...

Syslog attached from UnMenu

 

 

root@tower:~# ps -ef
UID        PID  PPID  C STIME TTY          TIME CMD
root         1     0  1 21:16 ?        00:00:05 init
root         2     0  0 21:16 ?        00:00:00 [kthreadd]
root         3     2  0 21:16 ?        00:00:00 [ksoftirqd/0]
root         4     2  0 21:16 ?        00:00:00 [kworker/0:0]
root         6     2  0 21:16 ?        00:00:00 [migration/0]
root         7     2  0 21:16 ?        00:00:00 [migration/1]
root         8     2  0 21:16 ?        00:00:00 [kworker/1:0]
root         9     2  0 21:16 ?        00:00:00 [ksoftirqd/1]
root        10     2  0 21:16 ?        00:00:00 [kworker/0:1]
root        11     2  0 21:16 ?        00:00:00 [khelper]
root       145     2  0 21:16 ?        00:00:00 [sync_supers]
root       147     2  0 21:16 ?        00:00:00 [bdi-default]
root       149     2  0 21:16 ?        00:00:00 [kblockd]
root       254     2  0 21:16 ?        00:00:00 [ata_sff]
root       264     2  0 21:16 ?        00:00:00 [khubd]
root       369     2  0 21:16 ?        00:00:00 [rpciod]
root       399     2  0 21:16 ?        00:00:00 [kswapd0]
root       459     2  0 21:16 ?        00:00:00 [fsnotify_mark]
root       478     2  0 21:16 ?        00:00:00 [nfsiod]
root       486     2  0 21:16 ?        00:00:00 [crypto]
root       545     2  0 21:16 ?        00:00:00 [kworker/1:1]
root       630     2  0 21:16 ?        00:00:00 [kworker/1:2]
root       657     1  0 21:16 ?        00:00:00 /sbin/udevd --daemon
root       759     2  0 21:16 ?        00:00:00 [scsi_eh_0]
root       814     2  0 21:16 ?        00:00:00 [scsi_eh_1]
root       836     2  0 21:16 ?        00:00:00 [scsi_eh_2]
root       837     2  0 21:16 ?        00:00:00 [scsi_eh_3]
root       838     2  0 21:16 ?        00:00:00 [scsi_eh_4]
root       842     2  0 21:16 ?        00:00:00 [scsi_eh_5]
root       850     2  0 21:16 ?        00:00:00 [scsi_eh_6]
root       865     2  0 21:16 ?        00:00:00 [scsi_eh_7]
root       866     2  0 21:16 ?        00:00:00 [scsi_eh_8]
root       868     2  0 21:16 ?        00:00:00 [scsi_eh_9]
root       871     2  0 21:16 ?        00:00:00 [scsi_eh_10]
root       872     2  0 21:16 ?        00:00:00 [scsi_eh_11]
root       873     2  0 21:16 ?        00:00:00 [kworker/u:3]
root       874     2  0 21:16 ?        00:00:00 [kworker/u:4]
root       893     2  0 21:16 ?        00:00:00 [scsi_eh_12]
root       894     2  0 21:16 ?        00:00:00 [usb-storage]
root       966     2  0 21:16 ?        00:00:00 [kworker/0:2]
root      1081     1  0 21:16 ?        00:00:00 /usr/sbin/syslogd -m0
root      1085     1  0 21:16 ?        00:00:00 /usr/sbin/klogd -c 3 -x
root      1111     1  0 21:16 ?        00:00:00 /sbin/dhcpcd -t 10 -h tower -C resolv.conf eth0
bin       1196     1  0 21:16 ?        00:00:00 /sbin/rpc.portmap
root      1200     1  0 21:16 ?        00:00:00 /sbin/rpc.statd
root      1210     1  0 21:16 ?        00:00:00 /usr/sbin/inetd
root      1217     1  0 21:16 ?        00:00:00 /usr/sbin/ntpd -g -p /var/run/ntpd.pid
root      1224     1  0 21:16 ?        00:00:00 /usr/sbin/acpid
81        1235     1  0 21:16 ?        00:00:00 /usr/bin/dbus-daemon --system
root      1240     1  0 21:16 ?        00:00:00 /usr/sbin/crond -l notice
daemon    1242     1  0 21:16 ?        00:00:00 /usr/sbin/atd -b 15 -l 1
root      4926     1  0 21:16 ?        00:00:00 /sbin/apcupsd
root      4937     2  0 21:16 ?        00:00:00 [flush-8:16]
root      5466     1  0 21:16 ?        00:00:01 /usr/local/logmein-hamachi/hamachid
root     11418  1210  0 21:17 ?        00:00:00 in.telnetd: 192.168.0.188
root     11419 11418  0 21:17 pts/0    00:00:00 -bash
root     11974     1  1 21:17 ?        00:00:05 /usr/local/sbin/emhttp
root     11980     2  0 21:17 ?        00:00:00 [mdrecoveryd]
root     11982     2  0 21:17 ?        00:00:00 [spinupd]
root     11983     2  0 21:17 ?        00:00:00 [spinupd]
root     11984     2  0 21:17 ?        00:00:00 [spinupd]
root     11985     2  0 21:17 ?        00:00:00 [spinupd]
root     11986     2  0 21:17 ?        00:00:00 [spinupd]
root     11987     2  0 21:17 ?        00:00:00 [spinupd]
root     11988     2  0 21:17 ?        00:00:00 [spinupd]
root     11989     2  0 21:17 ?        00:00:00 [spinupd]
root     11990     2  0 21:17 ?        00:00:00 [spinupd]
root     12003     2  0 21:17 ?        00:00:00 [kworker/1:3]
root     12004     2  0 21:17 ?        00:00:00 [kworker/0:3]
root     12005     2  0 21:17 ?        00:00:00 [kworker/0:4]
root     12014     1  0 21:17 ?        00:00:00 /usr/sbin/nmbd -D
root     12016     1  0 21:17 ?        00:00:00 /usr/sbin/smbd -D
avahi    12027     1  0 21:17 ?        00:00:00 avahi-daemon: running [tower.local]
avahi    12028 12027  0 21:17 ?        00:00:00 avahi-daemon: chroot helper
root     12030 12016  0 21:17 ?        00:00:00 /usr/sbin/smbd -D
root     12037     1  0 21:17 ?        00:00:00 /usr/sbin/avahi-dnsconfd -D
root     12071     2  0 21:17 ?        00:00:00 [unraidd]
root     12078   657  0 21:17 ?        00:00:00 /sbin/udevd --daemon
root     12079   657  0 21:17 ?        00:00:00 /sbin/udevd --daemon
root     12090     2  0 21:17 ?        00:00:00 [kworker/1:4]
root     12141     2  0 21:17 ?        00:00:00 [reiserfs]
root     12142     2  0 21:17 ?        00:00:00 [flush-9:8]
root     12143     2  0 21:17 ?        00:00:00 [flush-9:3]
root     12144     2  0 21:17 ?        00:00:00 [flush-9:2]
root     12145     2  0 21:17 ?        00:00:00 [flush-9:1]
root     12146     2  0 21:17 ?        00:00:00 [flush-9:4]
root     12147     2  0 21:17 ?        00:00:00 [flush-9:7]
root     12148     2  0 21:17 ?        00:00:00 [flush-8:160]
root     12150     2  0 21:17 ?        00:00:00 [flush-9:5]
root     12151     2  0 21:17 ?        00:00:00 [flush-9:6]
root     12197     1  0 21:17 ?        00:00:00 /usr/local/sbin/shfs /mnt/user0 -disks 2097150 -o noatime,big_writes,allow_other,default_permissions,use_ino
root     12204     1  0 21:17 ?        00:00:04 /usr/local/sbin/shfs /mnt/user -disks 2097151 2000000 -o noatime,big_writes,allow_other,default_permissions,use_i
root     12246     1  0 21:17 ?        00:00:00 /usr/sbin/cnid_metad
root     12249     1  0 21:17 ?        00:00:00 /usr/sbin/afpd
root     12259     1  0 21:17 ?        00:00:00 /bin/bash /boot/unmenu/uu
root     12260     1  0 21:17 ?        00:00:00 logger -tunmenu -plocal7.info -is
root     12264 12259  0 21:17 ?        00:00:00 awk -W re-interval -f ./unmenu.awk
root     12459     1  0 21:17 ?        00:00:00 /bin/bash /usr/local/sbin/cache_dirs -w -B -m 1 -M 10 -d 9999 -i Movie
root     12499     1  0 21:17 tty1     00:00:00 /sbin/agetty 38400 tty1 linux
root     12501     1  0 21:17 tty2     00:00:00 /sbin/agetty 38400 tty2 linux
root     12502     1  0 21:17 tty3     00:00:00 /sbin/agetty 38400 tty3 linux
root     12503     1  0 21:17 tty4     00:00:00 /sbin/agetty 38400 tty4 linux
root     12504     1  0 21:17 tty5     00:00:00 /sbin/agetty 38400 tty5 linux
root     12505     1  0 21:17 tty6     00:00:00 /sbin/agetty 38400 tty6 linux
root     15383     1  0 21:19 ?        00:00:00 /bin/bash /usr/local/sbin/s3_sleep -a -m12 -t5 -eeth0 -i192.168.0.128 -i192.168.0.137 -F
root     15666 11419  0 21:20 pts/0    00:00:00 top
root     24255 15383  0 21:23 ?        00:00:00 sleep 60
root     25188     2  0 21:24 ?        00:00:00 [kworker/0:5]
root     25298 12459  0 21:24 ?        00:00:00 sleep 9
root     25593 11974  0 21:24 ?        00:00:00 /usr/sbin/smartctl -n standby -A /dev/sda
root     25594 11974  0 21:24 ?        00:00:00 [smartctl] <defunct>
root     25595 11974  0 21:24 ?        00:00:00 [smartctl] <defunct>
root     25596 11974  0 21:24 ?        00:00:00 [smartctl] <defunct>
root     25597 11974  0 21:24 ?        00:00:00 [smartctl] <defunct>
root     25598 11974  0 21:24 ?        00:00:00 [smartctl] <defunct>
root     25599 11974  0 21:24 ?        00:00:00 [smartctl] <defunct>
root     25600 11974  0 21:24 ?        00:00:00 [smartctl] <defunct>
root     25601 11974  0 21:24 ?        00:00:00 [smartctl] <defunct>
root     25602 11974  0 21:24 ?        00:00:00 [smartctl] <defunct>
root     25603 11419  0 21:24 pts/0    00:00:00 ps -ef

syslog-2012-05-10.zip

Link to comment

Have this same problem - the log updates about every 2-3 seconds, jumping back to the top - using FF 12.0

 

Myk

 

 

Hi, one  "bug" I have seen long time ago,

 

When browsing syslog, the page always refresh, so its impossible to go down in the syslog.

 

Page Refresh Interval: = disable

 

 

//Peter

I don't have this behaviour and browsing the syslog works as expected (doing that a lot lately).

 

What browser are you using (or did you try with different browsers & cache cleared) ?

Link to comment

Have this same problem - the log updates about every 2-3 seconds, jumping back to the top - using FF 12.0

 

Myk

 

 

Hi, one  "bug" I have seen long time ago,

 

When browsing syslog, the page always refresh, so its impossible to go down in the syslog.

 

Page Refresh Interval: = disable

 

 

//Peter

I don't have this behaviour and browsing the syslog works as expected (doing that a lot lately).

 

What browser are you using (or did you try with different browsers & cache cleared) ?

 

It's the apcupsd plugin.  Take it out and you should not have the problem.

Link to comment

Have this same problem - the log updates about every 2-3 seconds, jumping back to the top - using FF 12.0

 

Myk

 

 

Hi, one  "bug" I have seen long time ago,

 

When browsing syslog, the page always refresh, so its impossible to go down in the syslog.

 

Page Refresh Interval: = disable

 

 

//Peter

I don't have this behaviour and browsing the syslog works as expected (doing that a lot lately).

 

What browser are you using (or did you try with different browsers & cache cleared) ?

 

It's the apcupsd plugin.  Take it out and you should not have the problem.

Use a different plugin for apcupsd. syslog works fine in simplefeatures now!

 

//Peter

Link to comment

I am using the one from the official wiki plugin page, not the version from unmenu......

 

Myk

 

 

Have this same problem - the log updates about every 2-3 seconds, jumping back to the top - using FF 12.0

 

Myk

 

 

Hi, one  "bug" I have seen long time ago,

 

When browsing syslog, the page always refresh, so its impossible to go down in the syslog.

 

Page Refresh Interval: = disable

 

 

//Peter

I don't have this behaviour and browsing the syslog works as expected (doing that a lot lately).

 

What browser are you using (or did you try with different browsers & cache cleared) ?

 

It's the apcupsd plugin.  Take it out and you should not have the problem.

Use a different plugin for apcupsd. syslog works fine in simplefeatures now!

 

//Peter

Link to comment

I am using the one from the official wiki plugin page, not the version from unmenu......

 

Myk

I understand, but that is the un-official plugin wiki page.  (there was only one plugin developed by lime-tech.  And that was certainly not one for a UPS, it was YAMJ.)

 

ALL PLUGINS other than the one developed by lime-technology are un-official. 

Other users like myself wrote them. (and I wrote the ones in unMENU... those work)

 

Joe L.

Link to comment

I'm sure this has already been discussed at some point but is it possible to access a terminal via the WebUI?

yes, it is, but I do not think there is a 5.X plug-in for it. 

 

It is available as an add-on package through unMENU's package manager.

It is known as "Shell In A Box"

 

Shell In A Box implements a web server that can export arbitrary command line tools to a web based terminal emulator. This emulator is accessible to any JavaScript and CSS enabled web browser and does not require any additional browser plugins. you access it at http://Tower:4500

 

Joe L.

Link to comment

I'm sure this has already been discussed at some point but is it possible to access a terminal via the WebUI?

yes, it is, but I do not think there is a 5.X plug-in for it. 

 

It is available as an add-on package through unMENU's package manager.

It is known as "Shell In A Box"

 

Shell In A Box implements a web server that can export arbitrary command line tools to a web based terminal emulator. This emulator is accessible to any JavaScript and CSS enabled web browser and does not require any additional browser plugins. you access it at http://Tower:4500

 

Joe L.

Joe L. beat me to it

Link to comment

New Package (activity monitor) and a small update for email notifications. Replacement for email notifications coming, and another useful package coming soon!

 

Change Log:

1.0rc3:

 

New Package! Activity monitor: takes queues from Mac OS X activity monitor. Realtime monitoring of processes, with sorting & filtering. Kill processes with ease!

 

email-notify: Fixed bug with commander

 

 

ActivityMonitor.png.1969255655b9c8101710e293b40a4f11.png

Link to comment

New Package (activity monitor) and a small update for email notifications. Replacement for email notifications coming, and another useful package coming soon!

 

Change Log:

1.0rc3:

 

New Package! Activity monitor: takes queues from Mac OS X activity monitor. Realtime monitoring of processes, with sorting & filtering. Kill processes with ease!

 

email-notify: Fixed bug with commander

 

 

Cool !

Link to comment
  • Squid locked this topic
Guest
This topic is now closed to further replies.