jochs Posted July 11, 2012 Share Posted July 11, 2012 Please add FTP next to SMB in settings/Network Services. I would love to be able to configure FTP via the GUI. I would also love to be able to tell who is logged into the ftp server and what they are downloading and at what speed. Stats like how much a user has downloaded would be nice too. Thanks! Link to comment
zirconi Posted July 11, 2012 Share Posted July 11, 2012 I posted on lounge forum but probably is better there : Ok so i'm trying some tests with the sleep addon of simplefeatures. If i manually put the server in sleep with the simple features button on the main gui I CAN wake it up without problems from my main pc or from my htpc with xbmc and WOL addon. If i setup a sleep scheduling with simple features with only these configurations : Wait for array inactivity: Yes Extra delay after array inactivity (minutes): 75 Interval of network / device inactivity (minutes): 5 I CANNOT wake it up from my pc or from my htpc but only pressing the power button on the server. I tried to set Set WOL options before sleep: g and even ethtool -s eth0 wol g before and after the sleep but nothing,i cannot wake the server. What the hell is happening ? Link to comment
kricker Posted July 11, 2012 Share Posted July 11, 2012 Please add FTP next to SMB in settings/Network Services. I would love to be able to configure FTP via the GUI. I would also love to be able to tell who is logged into the ftp server and what they are downloading and at what speed. Stats like how much a user has downloaded would be nice too. Thanks! +1. By default setting up the FTP is currently a real PIA. I keep trying and getting close. Then permissions and links and such get me all confused, so I quit and try again later. Then the process repeats itself. Link to comment
zlalanne Posted July 12, 2012 Share Posted July 12, 2012 I am having trouble changing the settings for SimpleFeatures. For example if I go to the stats settings and set "Show network graph:" to "yes" and click apply, it is automatically set back to no instead of keeping the value yes. Do I need to change permissions somewhere so that the web gui can write these settings to a file? Link to comment
jeffff Posted July 12, 2012 Share Posted July 12, 2012 Where can rc3 of SimpleFeatures be downloaded from? I've been looking on the googlecode link in the first post but only see an RC2 release of the base package. Is that the most recent? Or is there a rc3 available that I am missing? Many thanks - and I'm really looking forward to using what looks to be a great plugin! Link to comment
barrygordon Posted July 12, 2012 Share Posted July 12, 2012 RC2 is the latest release of the base plugin. I thing the only additions (plugins) that are RC3 are iTunes and log viewer. Check the first post for the link to the downloads Link to comment
tyrindor Posted July 13, 2012 Share Posted July 13, 2012 One thing i've noticed, but never bothered to report is the cache drive mover settings don't remember your settings for "weekly". If I set the day to Saturday, press apply, it goes back to Sunday on the UI. However it does actually run on Saturdays. Link to comment
alxscott Posted July 15, 2012 Share Posted July 15, 2012 First off, thanks for a brilliant web UI speeding_ant, and some brilliant additions / plugins. Much prefer your method of working it as opposed to the unMENU way. No offence to the brilliant work of the unMENU devs, its entirely personal preference! Here is my question / request! Recently opened a topic reference Bonjour Sleep Proxy Client Registration ( http://lime-technology.com/forum/index.php?topic=21326.0 ) and am awaiting a package to try it myself, tho Im told it works well. I'm wondering if you would be interested in either making a dedicated add on package for your "SimpleFeatures" Plugin, or possibly incorporate the source scripts into your S3 sleep package?! (https://github.com/awein/SleepProxyClient ) Any thoughts would be welcome! Thanks again! Alex Link to comment
jowi Posted July 16, 2012 Share Posted July 16, 2012 If i add just ONE data disk to my system, so no parity disk etc, the simplefeatures view shows the status "Array of two protected disks". See attached screenshot. Not even is my array not protected, there is only one physical disk. Link to comment
chickensoup Posted July 16, 2012 Share Posted July 16, 2012 Indeed a bug. It should read "Array of one unprotected disk." I'm guessing if you had 6 drives and no parity installed it would still say "protected" as well. Link to comment
jowi Posted July 16, 2012 Share Posted July 16, 2012 Indeed a bug. It should read "Array of one unprotected disk." I'm guessing if you had 6 drives and no parity installed it would still say "protected" as well. Yep. Link to comment
jowi Posted July 19, 2012 Share Posted July 19, 2012 I can't add users using the 'Users' tab. Looks like they're not saved. Pushing add or done doesnt do anything. Also, on the 'Shares' tab, there is no way to setup user permissions for a share, like the unRAID manual shows, or does it show up when there are more users than just 'root'? Link to comment
Helmonder Posted July 19, 2012 Share Posted July 19, 2012 Create them without capitals .. Link to comment
speeding_ant Posted July 20, 2012 Author Share Posted July 20, 2012 Apologies for the lack of appearance on this thread. I've been flat out with new job, haven't had time to develop or test the new release yet. Will be doing as much as I can in the next two weeks. Link to comment
barrygordon Posted July 20, 2012 Share Posted July 20, 2012 Apologies not needed as far as I am concerned. Works a PIA, especially when it gets in the way of fun. Being retired is great!! Link to comment
jowi Posted July 21, 2012 Share Posted July 21, 2012 If i take a look at the google repository i see a lot more plugins then there are on the start topic page. Is there some description about what each plugin is supposed to do? Do you have some support website other then this topic where more info can be found? I'm curious about what the 'folder caching' plugin does, en why there are 2 extra (?) webservers, one is called PLG, what does that mean? How do we use the Itunes plugins? Link to comment
mikeybunting Posted July 21, 2012 Share Posted July 21, 2012 Can somebody point me in the right direction to properly configure the "Email Notifications" settings in SimpleFeatures? For the life of me, I cannot get this to work (test email always fails) using my gmail.com address. Many thanks! Link to comment
Helmonder Posted July 22, 2012 Share Posted July 22, 2012 account email address: your full gmail adres ([email protected]) mail server: smtp.gmail.com port: 465 username: part before the @ in your email address password: your gmail password Link to comment
sureguy Posted July 23, 2012 Share Posted July 23, 2012 Can somebody point me in the right direction to properly configure the "Email Notifications" settings in SimpleFeatures? For the life of me, I cannot get this to work (test email always fails) using my gmail.com address. Many thanks! Note that if you use multi-factor authentication with gmail, you will have to generate an application specific password for unRAID. Link to comment
peter_sm Posted July 29, 2012 Share Posted July 29, 2012 @speeding_ant What is the command when setting the server to Sleep from the GUI? I see issue to wake my server..... the OpenVPN client is not resumed correct when usiing the sleep script, BUT clicking on the sleep button and then wake my server, OpenVPN works correct! Hope you can assist me ;-) EDIT Removed eth0 flag, the resume is OK Looks like this was not right, it looks like its still have the same issue...... //Peter Link to comment
jowi Posted July 30, 2012 Share Posted July 30, 2012 I'm not sure about the correctness of the unRaid stats. In my case, there seems to be no correlation between the cpu graph and the info shown when using the top command. E.g. if i do a copy, smbd and shfs will keep the cpu busy for almost 100% for a long time, and it just doesnt show in the stats. The stats show just 25 or 30% cpu use. Also sometimes the graph extends to 150%. Not sure what that means. I'm not actively overclocking Furthermore, als the network graph just basically stays empty all the time, just some glitches now and then. And i was copying to the server all night and all dat today... See attached graph. Link to comment
speeding_ant Posted July 30, 2012 Author Share Posted July 30, 2012 Top is relative to one CPU core (real or HT). The SF graph is a combined view of all cores. Regarding network, depends on how you use your server. When datapoints are taken every 2 minutes, you're bound to miss most packets if you're viewing a TV show or copying something small. If you keep viewing the page then the stats are updated every 2 seconds, meaning you'll see a better overview of performance. Cheers. Link to comment
chickensoup Posted July 30, 2012 Share Posted July 30, 2012 Also sometimes the graph extends to 150%. Not sure what that means. I'm not actively overclocking What does 150% on the SF graph represent? Is it ~100% per core? Does that mean a quad core with all four cores at full load would read 400%? Sorry, just like to clarify. Link to comment
speeding_ant Posted July 30, 2012 Author Share Posted July 30, 2012 That's actually a rendering bug. There should be a limit of 100% on the graph, likely the charting library drew 150% to offer a nicer overview. The actual data doesn't exceed 100%. Link to comment
Recommended Posts