speeding_ant Posted February 18, 2013 Author Share Posted February 18, 2013 Hi Stupid question time, how do i manually spin up / down individual disks in the new version, sure I'm going blind? Check in "Display Settings" in the settings page. Link to comment
mr.sparkle Posted February 18, 2013 Share Posted February 18, 2013 upgraded from 5.0rc8a to rc11 went fine upgraded from SF1.05 to 1.0.11 went fine installed PlexMediaServer-0.9.7.7 went fine after starting plex the main SF gui is no longer responding samba/nfs/alternate web server/plex all working fine checking: root@Tower:/boot# ps aux | grep emhttp | grep -v grep root 24511 0.2 0.0 12016 1504 ? Sl 12:33 0:17 /usr/local/sbin/emhttp so emhttp is running free -m says total 8105 used 2932 free 5172 - free should be much lower, no? just got an email saying unraid is fine, so that's working, too where to go from here, please? Link to comment
Harpz Posted February 18, 2013 Share Posted February 18, 2013 Hi Stupid question time, how do i manually spin up / down individual disks in the new version, sure I'm going blind? Check in "Display Settings" in the settings page. Its official shit in the eyes thought I looked in there many thanks for answering an obvious question. Link to comment
optiman Posted February 18, 2013 Share Posted February 18, 2013 @ Mr Sparkle - I had to clear my browser cache a couple of times before everything worked. Did you try that? Also, there is a newer Plex client, go here http://lime-technology.com/forum/index.php?topic=14803.0 I would uninstall Plex and see if everything comes back, if clearing the browser cache doesn't work. Link to comment
Reginald Posted February 18, 2013 Share Posted February 18, 2013 The update from 1.0.5 was insanely easy, thanks for all of your hard work, I am loving the new Stats and the temp in the interface! Link to comment
MartinQ Posted February 18, 2013 Share Posted February 18, 2013 What version of Joe L.'s 'cache_dirs' have you included with v1.0.11 of SimpleFeatures? Link to comment
optiman Posted February 18, 2013 Share Posted February 18, 2013 For those who want more colored icons (these are not part of simpleFeatures) Active Streams Activity Monitoring Logs System Info Disk Preclear Email Notifications Folder Caching S3 Sleep System Stats Right-click an image and store it in the /boot/plugins/simpleFeatures folder. You need to reboot to make the change effective. I copied these icons over and rebooted, but still have the default icons. I tried clearing the browser cache and tried with both IE and then Chrome. Any idea? Has anyone got these icons to show up? Link to comment
Frank1940 Posted February 19, 2013 Share Posted February 19, 2013 For those who want more colored icons (these are not part of simpleFeatures) Active Streams Activity Monitoring Logs System Info Disk Preclear Email Notifications Folder Caching S3 Sleep System Stats Right-click an image and store it in the /boot/plugins/simpleFeatures folder. You need to reboot to make the change effective. I copied these icons over and rebooted, but still have the default icons. I tried clearing the browser cache and tried with both IE and then Chrome. Any idea? Has anyone got these icons to show up? Yes, I have. I used Firefox but believe that the process should be the same with any browser. I right-clicked on the each icon and selected "Save Image as...". I then navigated to the /boot/plugins/simpleFeatures folder and saved the file there. Repeat eight more times. Of course you do have to reboot the server and perhaps clear your Windows browser cache. If you are still having an issue, double click on the .png files and see what you see. You should see the new icons. PS: You can do it right from the icons in the quote box above... Edit: I should make clear that '/boot/plugins/simpleFeatures' folder is where you go if the flash drive is still plugged into your server. If you have shut the server down, removed the flash drive and plugged it into your PC, you should copy the files to 'plugins\simpleFeatures' folder. If this is your initial install of 1.0.11 version of simple features, you might have to create the 'simpleFeatures' directory if it doesn't exist inside the 'plugins' folder. Link to comment
trurl Posted February 19, 2013 Share Posted February 19, 2013 For those who want more colored icons (these are not part of simpleFeatures) Active Streams Activity Monitoring Logs System Info Disk Preclear Email Notifications Folder Caching S3 Sleep System Stats Right-click an image and store it in the /boot/plugins/simpleFeatures folder. You need to reboot to make the change effective. I copied these icons over and rebooted, but still have the default icons. I tried clearing the browser cache and tried with both IE and then Chrome. Any idea? Has anyone got these icons to show up? Yes, I have. I used Firefox but believe that the process should be the same with any browser. I right-clicked on the each icon and selected "Save Image as...". I then navigated to the /boot/plugins/simpleFeatures folder and saved the file there. Repeat eight more times. Of course you do have to reboot the server and perhaps clear your Windows browser cache. If you are still having an issue, double click on the .png files and see what you see. You should see the new icons. PS: You can do it right from the icons in the quote box above... Just finished doing this and it worked for me too. Link to comment
MartinQ Posted February 19, 2013 Share Posted February 19, 2013 No CPU temps are reported here either. I'm running an ATI chipset with an Intel e2180 CPU. coretemp-isa-0000 Adapter: ISA adapter Core 0: temp2_input: 58.000 temp2_max: 86.000 temp2_crit: 100.000 temp2_crit_alarm: 0.000 Core 1: temp3_input: 58.000 temp3_max: 86.000 temp3_crit: 100.000 temp3_crit_alarm: 0.000 Link to comment
optiman Posted February 19, 2013 Share Posted February 19, 2013 For those who want more colored icons (these are not part of simpleFeatures) Active Streams Activity Monitoring Logs System Info Disk Preclear Email Notifications Folder Caching S3 Sleep System Stats Right-click an image and store it in the /boot/plugins/simpleFeatures folder. You need to reboot to make the change effective. I copied these icons over and rebooted, but still have the default icons. I tried clearing the browser cache and tried with both IE and then Chrome. Any idea? Has anyone got these icons to show up? Ok, figured it out. When I selected each icon and did a Save Picture As... it saved the files with underscores instead of periods. With IE9, it saved them as "simpleFeatures_activity_monitor.png" instead of simpleFeatures.activity.monitor.png. I renamed and copied them again. I didn't reboot yet cuz we are watching a movie, but I'm sure it will work now. Update: icons all good after the reboot - very nice! Link to comment
bnevets27 Posted February 19, 2013 Share Posted February 19, 2013 Well the upgrade hasn't gone smoothly for me so far (coming from 1.05 fresh install). Dumped most of the plugins into the plugins folder and I couldn't get unraid to respond on //tower, I could get it on putty though. Rebooted and didn't respond over the network at all. Moved the plugins out of the plugins folder and booted and accessed //tower without any problems. Sorry didn't get any logs, though there might be one.... Anyhow, started to install the plugins manually and ran into this. root@Tower:~# installplg /boot/config/plugins/simpleFeatures.system.info-1.0.10-noarch-1.plg installing plugin: simpleFeatures.system.info-1.0.10-noarch-1 file /tmp/plugin-prepare: successfully wrote INLINE file contents /bin/bash /tmp/plugin-prepare ... success file /boot/plugins/simpleFeatures/simpleFeatures.system.info-1.0.10-i486-1.txz: downloading from http://unraid-simplefeatures.googlecode.com/files/simpleFeatures.system.info-1.0.10-i486-1.txz ... wget: error while loading shared libraries: libssl.so.0: cannot open shared object file: No such file or directory bad download, deleting Warning: unlink(/boot/plugins/simpleFeatures/simpleFeatures.system.info-1.0.10-i486-1.txz): No such file or directory in /usr/local/sbin/installplg on line 70 I got that for stats and temp also. Active streams, activity monitor, cache dirs, core, disk health, email and log all installed fine. Link to comment
speeding_ant Posted February 19, 2013 Author Share Posted February 19, 2013 Did you try the latest plugin package download or the initial release? Link to comment
bnevets27 Posted February 19, 2013 Share Posted February 19, 2013 Did you try the latest plugin package download or the initial release? Version 1.0.11 downloaded a few hours ago Link to comment
xamindar Posted February 19, 2013 Share Posted February 19, 2013 Did you try the latest plugin package download or the initial release? Version 1.0.11 downloaded a few hours ago are you sure you waited long enough? It takes quite a while to start the first time. Sent from my SGH-T889 using Tapatalk 2 Link to comment
bnevets27 Posted February 19, 2013 Share Posted February 19, 2013 wait for what? For unraid to boot? If so then yes I did, I had to hook up a monitor to my unraid server to reboot it because I couldn't access it over the lan. Just rebooted again after having manually installed the packages I listed above and I can't access unraid via the web browser. And my user shares disappeared, only the disk shares are visible. I can telnet into nope problem, which is good so I can remove the plugin and reboot. I'm going to revert back to 1.0.5 or live without simplefeature for now. This is a bit more then a mirror glitch. (Went back to stock, i.e. no simple features, and everything is back to normal) Got a log this time but its late and its too big to attach so I'll have to host it somewhere tomorrow. (I know about pastebin but don't have an account to delete my log after) It's crazy the file limit is 192kb! Can't even attach a txt file.... syslog: http://pastebin.com/vqCTb2uj Link to comment
xamindar Posted February 19, 2013 Share Posted February 19, 2013 Not sure if this is an issue with this plugin. I am unable to manually start the mover script to transfer everything off my cache drive. Also, my cache drive completely filled up despite having a min free space of 5gigs set. Ill have to investigate that issue. Can anyone else confirm this issue? Link to comment
Helmonder Posted February 19, 2013 Share Posted February 19, 2013 I can confirm that the manual mover start works from my system. Link to comment
Helmonder Posted February 19, 2013 Share Posted February 19, 2013 CPU and MB temps are not beiing reported (just green blocks), sensors -u output included: root@Tower:~# sensors -u coretemp-isa-0000 Adapter: ISA adapter Physical id 0: temp1_input: 39.000 temp1_max: 80.000 temp1_crit: 85.000 temp1_crit_alarm: 0.000 Core 0: temp2_input: 39.000 temp2_max: 80.000 temp2_crit: 85.000 temp2_crit_alarm: 0.000 Preclearing my new 4TB right now and loving the fact that the main screen now shows the status of it ! I could not find how to start it off so I did that from screen manually. Got a small heartattach looking at the speed the gui reboots for the preclear, it is steadily at 15MB/s, when look in screen however it is at 50 to 80 MB/s which is what I would expect with what I am doing with the system at the moment, but that looks like a small error. The reported percentage is correct. It would also be nice if the temperature of the disk would be shown, since the disk is stressed during preclear and quite possibly is also in a location a disk has never been in it would be sensible to keep an eye on temperature. Something else I notice: I don't know what happened but as far as the gui was concerned my disks would allmost never spin down, and after a (manual) spin down they would spin ip within the minute.. Since the new version allmost all my disks show spun down... I am wondering if this was a gui glitch in the previous version where disks were actually spun down but did not show it or something else.. But it makes me happy.. ! Link to comment
optiman Posted February 19, 2013 Share Posted February 19, 2013 manual Mover script worked for me too, although it sseems a little slow but that could be due to lots of small music files. Link to comment
Frank1940 Posted February 19, 2013 Share Posted February 19, 2013 No Temperature reporting on either of my AMD systems. Output for sensors -u below: System referred to as "Media Server": root@Elsie1:~# sensors -u k10temp-pci-00c3 Adapter: PCI adapter temp1: temp1_input: 26.375 temp1_max: 70.000 System referred to as "Test Bed: root@Tower:~# sensors -u No sensors found! Make sure you loaded all the kernel drivers you need. Try sensors-detect to find out which these are. root@Tower:~# sensors-detect -bash: /usr/sbin/sensors-detect: /usr/bin/perl: bad interpreter: No such file or directory root@Tower:~# This 'Test Bed' system is built on very old hardware and that hardware may not even support the reporting (or even the measurement) of temperature. I thought I would report as it might be useful to implement code to prevent the continuous probing of the system as it does result on-screen error messages on a connected monitor. Link to comment
xamindar Posted February 19, 2013 Share Posted February 19, 2013 manual Mover script worked for me too, although it sseems a little slow but that could be due to lots of small music files. thanks for the responses. I just noticed that the /mnt/user0 directory is missing. My shares are set to use the cache drive so I am totally confused on why this is the case. Link to comment
peter_sm Posted February 19, 2013 Share Posted February 19, 2013 I checked what more sensors I have, now it looks like this ,can this info be viewed in SF in the future ? # Chip drivers modprobe coretemp modprobe w83627ehf modprobe i2c-dev Sensor info (from /usr/bin/sensors) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +40.0 C (high = +85.0 C, crit = +105.0 C) Core 0: +29.0 C (high = +85.0 C, crit = +105.0 C) Core 1: +38.0 C (high = +85.0 C, crit = +105.0 C) Core 2: +36.0 C (high = +85.0 C, crit = +105.0 C) Core 3: +40.0 C (high = +85.0 C, crit = +105.0 C) nct6776-isa-0290 Adapter: ISA adapter Vcore: +1.14 V (min = +0.00 V, max = +1.74 V) in1: +1.85 V (min = +0.00 V, max = +0.00 V) ALARM AVCC: +3.34 V (min = +2.98 V, max = +3.63 V) +3.3V: +3.34 V (min = +2.98 V, max = +3.63 V) in4: +0.12 V (min = +0.00 V, max = +0.00 V) ALARM in5: +1.69 V (min = +0.00 V, max = +0.00 V) ALARM 3VSB: +3.44 V (min = +2.98 V, max = +3.63 V) Vbat: +3.25 V (min = +2.70 V, max = +3.63 V) fan1: 1807 RPM (min = 0 RPM) ALARM fan2: 2089 RPM (min = 0 RPM) ALARM fan3: 0 RPM (min = 0 RPM) ALARM fan4: 0 RPM (min = 0 RPM) ALARM fan5: 0 RPM (min = 0 RPM) ALARM SYSTIN: +21.0 C (high = +0.0 C, hyst = +0.0 C) ALARM sensor = thermistor CPUTIN: +26.0 C (high = +80.0 C, hyst = +75.0 C) sensor = thermistor AUXTIN: +50.0 C (high = +80.0 C, hyst = +75.0 C) sensor = thermistor PECI Agent 0: +35.5 C cpu0_vid: +0.000 V intrusion0: ALARM intrusion1: ALARM And sensors -u root@tower:~# sensors -u coretemp-isa-0000 Adapter: ISA adapter Physical id 0: temp1_input: 44.000 temp1_max: 85.000 temp1_crit: 105.000 temp1_crit_alarm: 0.000 Core 0: temp2_input: 33.000 temp2_max: 85.000 temp2_crit: 105.000 temp2_crit_alarm: 0.000 Core 1: temp3_input: 44.000 temp3_max: 85.000 temp3_crit: 105.000 temp3_crit_alarm: 0.000 Core 2: temp4_input: 27.000 temp4_max: 85.000 temp4_crit: 105.000 temp4_crit_alarm: 0.000 Core 3: temp5_input: 33.000 temp5_max: 85.000 temp5_crit: 105.000 temp5_crit_alarm: 0.000 nct6776-isa-0290 Adapter: ISA adapter Vcore: in0_input: 1.144 in0_min: 0.000 in0_max: 1.744 in0_alarm: 0.000 in1: in1_input: 1.848 in1_min: 0.000 in1_max: 0.000 in1_alarm: 1.000 AVCC: in2_input: 3.344 in2_min: 2.976 in2_max: 3.632 in2_alarm: 0.000 +3.3V: in3_input: 3.344 in3_min: 2.976 in3_max: 3.632 in3_alarm: 0.000 in4: in4_input: 0.120 in4_min: 0.000 in4_max: 0.000 in4_alarm: 1.000 in5: in5_input: 1.688 in5_min: 0.000 in5_max: 0.000 in5_alarm: 1.000 3VSB: in7_input: 3.440 in7_min: 2.976 in7_max: 3.632 in7_alarm: 0.000 Vbat: in8_input: 3.248 in8_min: 2.704 in8_max: 3.632 in8_alarm: 0.000 fan1: fan1_input: 1807.000 fan1_min: 0.000 fan1_alarm: 1.000 fan2: fan2_input: 2083.000 fan2_min: 0.000 fan2_alarm: 1.000 fan3: fan3_input: 0.000 fan3_min: 0.000 fan3_alarm: 1.000 fan4: fan4_input: 0.000 fan4_min: 0.000 fan4_alarm: 1.000 fan5: fan5_input: 0.000 fan5_min: 0.000 fan5_alarm: 1.000 SYSTIN: temp1_input: 21.000 temp1_max: 0.000 temp1_max_hyst: 0.000 temp1_alarm: 1.000 temp1_type: 4.000 temp1_offset: 0.000 CPUTIN: temp2_input: 26.000 temp2_max: 80.000 temp2_max_hyst: 75.000 temp2_alarm: 0.000 temp2_type: 4.000 temp2_offset: 0.000 AUXTIN: temp3_input: 50.000 temp3_max: 80.000 temp3_max_hyst: 75.000 temp3_alarm: 0.000 temp3_type: 4.000 temp3_offset: 0.000 PECI Agent 0: temp5_input: 44.000 cpu0_vid: cpu0_vid: 0.000 intrusion0: intrusion0_alarm: 1.000 intrusion1: intrusion1_alarm: 1.000 Link to comment
xamindar Posted February 19, 2013 Share Posted February 19, 2013 Here is my sensors -u in case this helps. My temp display is NOT working either: k10temp-pci-00c3 Adapter: PCI adapter temp1: temp1_input: 61.500 temp1_max: 70.000 temp1_crit: 100.000 temp1_crit_hyst: 97.000 it8721-isa-0290 Adapter: ISA adapter in0: in0_input: 1.068 in0_min: 2.028 in0_max: 1.896 in0_alarm: 1.000 in1: in1_input: 2.220 in1_min: 1.824 in1_max: 0.660 in1_alarm: 1.000 in2: in2_input: 2.880 in2_min: 0.756 in2_max: 0.492 in2_alarm: 1.000 +3.3V: in3_input: 3.336 in3_min: 5.760 in3_max: 4.560 in3_alarm: 1.000 in4: in4_input: 2.220 in4_min: 1.956 in4_max: 3.024 in4_alarm: 0.000 in5: in5_input: 2.988 in5_min: 2.292 in5_max: 1.368 in5_alarm: 1.000 in6: in6_input: 2.220 in6_min: 3.012 in6_max: 3.036 in6_alarm: 1.000 3VSB: in7_input: 3.360 in7_min: 5.952 in7_max: 2.856 in7_alarm: 1.000 Vbat: in8_input: 3.312 fan1: fan1_input: 0.000 fan1_min: 105.000 fan1_alarm: 1.000 fan2: fan2_input: 3835.000 fan2_min: 15.000 fan2_alarm: 0.000 temp1: temp1_input: 49.000 temp1_max: -47.000 temp1_min: -90.000 temp1_alarm: 1.000 temp1_type: 4.000 temp2: temp2_input: 40.000 temp2_max: -113.000 temp2_min: -42.000 temp2_alarm: 1.000 temp2_type: 4.000 temp3: temp3_input: -8.000 temp3_max: -74.000 temp3_min: 12.000 temp3_alarm: 1.000 temp3_type: 4.000 intrusion0: intrusion0_alarm: 1.000 Link to comment
GFOviedo Posted February 19, 2013 Share Posted February 19, 2013 My temp for CPU / board only works in Fahrenheit not in celsius. Link to comment
Recommended Posts