March 6, 20224 yr Hi. I have some problems with my unraid server. It sometimes crashes and reboots and sometimes it just frezzes and after a while i starts to respond again. Sometimes my transferspeed frezzes when I´m tranfesring large files over smb. It starts with 80mb/sec and then slowly reduces to zero. I´m using cache drives and when i´m moving files to the array it takes hours to transfer 30 gigs. sometimes it just takes minutes. Parity check always stays around 120mb/s I dont know what to do? Sorry for my English. Hope you understand. Hp Proliant DL380 G8 with P420i set to hba-mode Intel® Xeon® CPU E5-2690 v2 @ 3.00GHz * 2 96 gb of ram unraidone-diagnostics-20220306-1216.zip Edited March 6, 20224 yr by Baloba
March 6, 20224 yr Community Expert Nothing obvious in the diags, enable the syslog server and post that after a crash.
March 6, 20224 yr Author Hi and thanks for reply. I´ve activated syslog server but I havent had any reboots yet and I cant see any errors in the log. There is still slow writespeed and if I start "mower" manually my containers starts getting slow and sometimes unresponsive. I have a plex container and I get a lot of slow connection to db and errors in sql database. When i´m transfering files through smb the plex streaming pauses.
March 7, 20224 yr Author Hi. Started a transfer with smb share. The transfer is pending between 0 and 30 mb/s Sometimes its frezzes and resumes after about 2 minutes. I ran a dd command and the write speed is really low. It frezzes at 15:24 but I cant see anything in the log. unraidone-diagnostics-20220307-1533.zip syslog.log
March 7, 20224 yr Community Expert In my experience those Kingston A400 SSDS are some of the worst models out there performance wise, if the pool is just the Samsung device does it perform better?
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.