March 7, 20224 yr Hi there. I started a parity check today, and a couple minutes in Disk 3 of my array drives suffered the Red X. I cancelled the parity check. Diagnostics attached. I could use help reading the SMART reports for the drive, and if there's anything else that looks like trouble. Thanks for any advice. tower-diagnostics-20220307-0443.zip Edited March 9, 20224 yr by stor44 SOLVED
March 7, 20224 yr Community Expert Solution It's not logged as a disk issue, and the disk looks healthy, check/replace cables or swap slots and if the emulated disk is mounting rebuild on top.
March 9, 20224 yr Author Thanks for that Jorge. I was able to shutdown unRAID, re-check the cables and swap the one to Disk 3 with a new cable. I booted back up and followed the wiki here to rebuild a failed drive to itself. A few minutes in, Disk 5 got a Red X as well. I let the rebuild finish so Disk 3 would be fixed, and then swapped a new cable in for Drive 5 and rebuilt to that drive as well. A couple long days, but I'm back to good now. Cheers.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.