Fear Friends,

 

I have  tw0 ssd p4-480 connect in /dev/sdc and /dev/sdd , as show below.

 

root@unraid:~# lsscsi
[0:0:0:0]    disk    SanDisk' Cruzer Fit       1.00  /dev/sda 
[1:0:0:0]    disk    ATA      ST2000DM001-1ER1 CC43  /dev/sdb 
[1:0:1:0]    disk    ATA      P4-480           60    /dev/sdc 
[1:0:2:0]    disk    ATA      P4-480           522a  /dev/sdd 
[1:0:3:0]    disk    ATA      WDC WD5000LPVX-7 1A01  /dev/sde 
[1:0:4:0]    disk    ATA      ST2000DM008-2FR1 0001  /dev/sdf 
[1:0:5:0]    disk    ATA      ST2000VX008-2E31 CV12  /dev/sdg 
[2:0:0:0]    disk    ATA      WDC WDS480G2G0A- 0000  /dev/sdh 
[3:0:0:0]    disk    ATA      ST1000DM003-1CH1 CC47  /dev/sdi 
[4:0:0:0]    disk    ATA      ST2000DM001-1ER1 CC43  /dev/sdj 
[5:0:0:0]    disk    ATA      ST1000DM003-1CH1 CC44  /dev/sdk 
[6:0:0:0]    disk    ATA      ST1000DM003-1CH1 CC47  /dev/sdl 
[7:0:0:0]    disk    ATA      ST2000DM001-1ER1 CC26  /dev/sdm

 

 

But Unassigned Devices only show /dev/sdd on Unassigned Devices. But Last week show both SSD correct, i.e., /dev/sdc and /dev/sdd 

 

Is There  force to recognize ssd /dev/sdc  ?

 

Thanks for all

 

 

 

 

Please post the diagnostics.

I attached diagnostic file.

 

Thanks

unraid-diagnostics-20220307-1415.zip

Edited March 7, 20224 yr by Adriano Frare

Unraid is seeing both devices with the same ID, they might work if you connect them to the onboard SATA ports (or flash the LSI to IT mode, which you should anyway, but will require a new config).

Dear.

 

How I configure LSI for IT MODE ? I don't know ITmode.

 

Thanks for all

 

 

https://wiki.unraid.net/Crossflashing_Controllers

Thanks !!