I dunno what happened. It was working fine, then it went unresponsive. I tried to reboot and couldn't reach it remotely. I then tried to start it in GUI mode and when it gets to that step, I just get a blinky cursor. Reboot into CLI, I get a login prompt and it logs in, but still no webui.

 

I pinged Google, complete packet lost. Pinged my main router, also no dice. I have a secondary moca router that my Unraid is connected to that didn't have the conected light on. I power cycled it, it connected and I logged into my main router and still didn't see Unraid online. I also didn't see another machine connected to the same switch behind the moca router. I logged into the managed switch and it said both links were up though. I'm gonna replace it with unmanaged switch in the morning. I'm tired and I'm pulling my hair out.  I dunno if these issues are related or what's not working right atm.

It might be worth logging in at the console and using the 'df' command to check that it shows a /boot mount point as if that does not show then the problem is the flash drive not being recognized in the later stages of the boot.

 

If that DOES show then using the 'diagnostics' command will get a file written to the /logs folder on the flash drive that you can post here to see if anyone spots an issue.

Those commands worked as described. Here's my diag zip.

I tried bypassing the switch and plugging it directly into the router, still didn't get me any network connection. I plugged my laptop in the switch and it connect no problem. 

 

I tried doing some searching and I came across a similar situation with no clear solution here: 

 

 

 rexbox1-diagnostics-20220308-1107.zip

Edited March 8, 20224 yr by howyoulikethat