reboot issue

[Zjames100]

Hello, I am new to Unraid and recently turned my old computer that I haven't been using into a Unraid serve to run plex and store my photos and documents. I had just completed moving my files over fromsome of my hard drives I planned to use in the unraid server. So I had my partly do a stop and then shut down the server. After install the drives i wanted to install, I rebooted the computer and it would not boot into unraid. I would be taken to my bios menu and when I would exit out it would s=just flash back to the bios. I tried reverting my serve back to just the drives I had on it when I first got it up and running to see if I was having some sort of issue with the drives i had installed but got the same issue. So I testes the flash drive out on another computer of mine to see if I was maybe having an issue with my flash drive that unraid was on. It booted right into unraid. So I then connected my old drive that windows was on for the old computer so see if maybe i was having an issue with my computer. And it botted right back into windows. So I am lost and would like to know what I need o do or can do to get my unraid server to reboot. The cmoputer is in old asus mb with an intel i5 4760 process and 8 gb of ram if this helps at all.

 

Zach

[Frank1940]

Often when you add new drives to a computer (physical device), the BIOS will 'decide' that one of the new drives is the one that it should be booting up from.  So check your BIOS for the drive boot order and make sure that your Unraid flash drive is the first one.