chris_netsmart Posted March 16, 2022 Share Posted March 16, 2022 I have just been doing some house keeping and have just removed a old HD from my RAID, which I rarely used. taking the discs from 6 to 5 but now I am getting an error message that the Device is Missing (Disable ) Emulated. is there a way to reset this so that the system knows that I have removed the HD ? Quote Link to comment
JonathanM Posted March 16, 2022 Share Posted March 16, 2022 Is there any data on the emulated disk? Quote Link to comment
chris_netsmart Posted March 16, 2022 Author Share Posted March 16, 2022 1 hour ago, JonathanM said: Is there any data on the emulated disk? No, as I emptied it all out, Quote Link to comment
JonathanM Posted March 16, 2022 Share Posted March 16, 2022 Tools, new config, preserve all, apply, go to main tab, make sure assignments are correct, start array and build parity. Quote Link to comment
itimpi Posted March 16, 2022 Share Posted March 16, 2022 3 minutes ago, chris_netsmart said: No, as I emptied it all out, In that case you can follow this procedure from the online documentations accessible via the ‘Manual’ link at the bottom of the GUI. 1 Quote Link to comment
Solution chris_netsmart Posted March 16, 2022 Author Solution Share Posted March 16, 2022 1 hour ago, itimpi said: In that case you can follow this procedure from the online documentations accessible via the ‘Manual’ link at the bottom of the GUI. many thanks this has resulted the issue, now I have about 25 hours of parity checks 🙂 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.