Hi all 

 

I am trying ot add a WD Black NVME drive as a cache drive and getting a weirdd issue .

 

I was using this drive in a USB3 case for a little while and thought i would whack into the HP Gen 8 as a cachee drive, before putting it in to the Gen i deleted the partition in Winddows , created the partition but did not format, i then put the drive in a NMVE to PCIE adaptor and ran it in Unraid.

The drive recongnizes but fails Preclear, if i assign to the cache pool and start the array the FS is showing as auto and i cannot seen to change it anywhere. I am unable ot format or mount the drive, i have attached the log for the drive itself 

 

Edit: looking at the settings for the cache pool the drive's Partion Format is unknown

 

 

 

log.txt

Edited March 17, 20224 yr by glenncol
Add more info

Have you tried setting the file system type BEFORE starting the array?  I would also suggest that you deleted any existing partitions first as Unraid normally wants to do the partitioning itself of any drive it is going to use.

17 hours ago, itimpi said:

Have you tried setting the file system type BEFORE starting the array?  I would also suggest that you deleted any existing partitions first as Unraid normally wants to do the partitioning itself of any drive it is going to use.

Hi thank for your response.

 

I deleted the portions completely and got to set the file system to btrfs , I got the format button , hot format and it failed to format and the drive disappeared , I had to get over the same steps again and when I hit format , it came back complete but actually did not format.

 

Restating the unit the drive came up as unmountable again

@glenncol,

Have you manged to fix the problem ?

I experiancing same issue with WD back 500GB drrive as cache. 

Experiencing the exact same issue with a WD Blue 500gb nvme disk in a pcie adapter. Hopefully someone knows a solution for this ?

Please post the diagnostics.