Hello,

I know this topic has several discussions, but none of them seems to work for me, or links do just not work anymore.
So this is the situation:

When I normally create the USB-boot-device i can boot the stick and everything seems to be fine, but
IPv4 address: not set
IPv6 address: not set

 

so I found that there should be diagnostics possible
They just don't work if you are not connected.

So I changed the /config/network.cfg in that way:
USE_DHCP="no"
IPADDR="192.168.2.150" (192.168.2.xxx because I can reach my router with that address and 150 because I think that port is free)
NETMASK="255.255.255.0"
GATEWAY="192.168.2.1" (1, because somebody suggested that in that forum here)
BONDING="no"
BRIDGING="yes"

As I tried to boot from the stick again it seemed to work, because I get this result:

unRAID Server OS version: 6.9.2
IPv4 address: 192.168.2.150
IPv6 address: not set

UnRaid login: root
Linux 5.10.28-Unraid.
root@UnRaid: #

 

The problem is just, that I still can not connect to it when I use that IP-address at my laptop (which is connected to the same router)
(both my devices have just wifi if this is can be part of the problem)

I got the diagnostics file, but I can't upload it here somehow..

I am looking forward your help please..


 

Edited March 20, 20224 yr by MICH3SESSION

Did you ever figure this out? Fighting the same issue now.

1 minute ago, wes.crockett said:

Did you ever figure this out? Fighting the same issue now.

Similar issues (no IPv4 address) don't necessarily mean same problem.  Posting your diagnostics will tell the entire story