April 1, 20224 yr Probably a dumb question, but I'm going to ask it because I have no shame 😁 I recently downsized the number of devices in my array as I replaced all my 8TB drives with 14TB drives since one of the 8TB drives failed. Now, my devices are named: Parity, Disk 1, Disk 3, Disk 4. Disk 2 was the previous device that had failed. I'm a bit picky about the continuity of the ordering, so I'd like to have Parity, Disk 1, Disk 2, Disk 3 instead. Is there a way to rename the drives to the sequential numbering scheme without breaking anything? I'm a little apprehensive as I'm a bit of a Unraid noob. Is it just a matter of creating a new config and reassigning the drives, or is it a bit more complex than that? https://imgur.com/jPde6Uc Edited April 1, 20224 yr by syee
April 1, 20224 yr Community Expert You can do a new config to re-assign the data drives, then check "parity is already valid" before starting the array, it still is with parity1 after changing slots, not with parity2.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.