April 2, 20224 yr I just built a new server. I'm able to press F8 during post to get to the boot menu and select my USB and boot up just fine. But if my server restarts for any reason, after POST it goes to a black screen and no further. All help is appreciated!
April 2, 20224 yr Is what you're selecting via F8 the same as what you've got listed in the boot order? If you've got an LSI controller and say more than 12 drives total, then you should disable Int13H in the controller's BIOS to prevent them from being available in the boot order -> Many (most?) BIOS's have a limitation where after 12 hard drives things become wonky for selecting a non hard drive for the boot
April 2, 20224 yr Author It seems to have resolved itself after another reboot! To answer your question though, I only have 6 drives in this build. I'll report back if the issue returns. Thanks.
April 2, 20224 yr Community Expert 15 minutes ago, itz4blitz said: It seems to have resolved itself after another reboot! To answer your question though, I only have 6 drives in this build. I'll report back if the issue returns. Thanks. Which motherboard do you have I sometimes have this with my msi z690 but just updated to latest bios, not sure if fixed yet.
April 3, 20224 yr Author 4 hours ago, SimonF said: Which motherboard do you have I sometimes have this with my msi z690 but just updated to latest bios, not sure if fixed yet. ASUS H610M-A D4 I did update the bios earlier today as well.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.