Hi,

 

Hoping for help here or just this to start working on its own but can't get UNRAID back up outside of the non-GUI and only when I have a monitor and keyboard connected to the server directly.  Unable to access via web browser on other machines on same network.  UNRAID does not even appear on the connected devices list within my network at this time.

 

Problem began when my dockers crashed sometime overnight apparently (was working at 2am and don't know exactly when it went bad) and when I went to try and delete the docker.img from settings it then would never restart.  Tried a reboot and machine never came back on from reboot or shutdown.  After maybe 30 minutes of it still saying it was rebooting I manually powered it off holding power button (I know not the best solution but something had to give after 30 minutes...).  I've had the issue of it not booting up correctly in past when it decided to be finicky after me installing another hard drive or something but this time nothing was changed.  I managed to pull a diagnostic file through command lines and then removing the flash drive and putting it into my PC to extract file and upload here.  Two diagnostics files were apparently generated so attached both to be safe.  GUI mode did not boot up using either GUI or GUI safe mode and only gives me the blinking underscore.

 

Any ideas what is going on?  Are these diagnostic files any help or did I screw myself on diagnosing issue by rebooting/powering off before pulling a diagnostic file?  Kicking myself about that as I knew better too...

 

UPDATE: Still down but what is really leaving me scratching my head is that unless I first go into the BIOS menu when first powering the machine up it will not bring me to an UNRAID boot menu (UNRAID OS, UNRAID OS Web-GUI, etc).  Getting nervous something serious corrupted since I've never had it go this long or even be able to load the GUI when plugging a monitor/keyboard/mouse directly into the server itself.  Fingers crossed this can be fixed and I don't lose data...

jeffunraid-diagnostics-20220405-1959.zip jeffunraid-diagnostics-20220405-2002.zip

Edited April 6, 20224 yr by Canes

Any help available here?  Passing 24 hours with no ability to boot into either console GUI or webUI.  Tried renaming network.cfg and network-rules.cfg to be .cfg.old file extensions and when I booted back up no IP address is found. 

 

I put a cheap vid card in I had laying around and enabled CSM in mobo BIOS hoping to get into GUI with non-UEFI boot after realizing it was UEFI but still no luck.

 

Running out of options and really hoping someone can direct me on what to do.  I really am worried about losing access to all my Plex data (50TB+) given how long it took to build that library up.

I can't believe this... it literally came back out of nowhere.  Everything is working as it should... I'm scratching my head but I'm just glad to say this fixed itself.  God d****t UNRAID for that mind****... 

 

Mark this solved and by means of divine intervention/UNRAID deciding to play nice.  No explanation.  I powered it back up after work today as a hail mary watched it show the IP it should and ask for my login on monitor. Said "OK...." not wanting to get too excited and then loaded the WebUI on another laptop connected to my network and "Son of a *****" there was my UNRAID login page. Logged in, started array and no errors. Didn't ask for a parity check or anything... Don't even know what to say. It just sat turned off for about a day since the last time I tried messing with it.

 

Now to catch up on new movies and series that released during that downtime.  Incredible.