May 9, 201115 yr I installed the unraid-status-email package through unMenu yesterday in the course of building my server. It's sending me failure notifications every hour, but I'm never able to find any errors in the syslog. Right now the system is operating without a parity drive - I'm in the process of preclearing it. Could that be the problem? I'm attaching my syslog, and the emails I'm receiving look like this: Subject:unRaid Failure Notification - One or more disks are disabled or invalid. Status update for unRAID Tower - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Status: ERROR: The unRaid array needs attention. One or more disks are disabled or invalid. Disk 0=DISK_DSBL_NP Server Name: Tower Server IP: 192.168.2.2 Date: Mon May 9 09:47:02 EDT 2011 Output of /proc/mdcmd: - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - sbName=/boot/config/super.dat sbVersion=1.1.1 sbCreated=1304884566 sbUpdated=1304885035 sbEvents=3 sbState=0 sbNumDisks=3 sbSynced=0 sbSyncErrs=0 mdVersion=1.1.1 mdState=STARTED mdNumProtected=3 mdNumDisabled=1 mdDisabledDisk=0 mdNumInvalid=1 mdInvalidDisk=0 mdNumMissing=0 mdMissingDisk=0 mdNumNew=0 mdResync=0 diskNumber.0=0 diskName.0= diskSize.0=0 diskState.0=4 diskModel.0= diskSerial.0= diskId.0= rdevNumber.0=0 rdevStatus.0=DISK_DSBL_NP rdevName.0= rdevSize.0=0 rdevModel.0= rdevSerial.0= rdevId.0= rdevNumErrors.0=0 rdevLastIO.0=0 rdevSpinupGroup.0=0 diskNumber.1=1 diskName.1=md1 diskSize.1=1953514552 diskState.1=7 diskModel.1=SAMSUNG HD204UI diskSerial.1=S2H7JD6ZB00486 diskId.1=SAMSUNG_HD204UI_S2H7JD6ZB00486 rdevNumber.1=1 rdevStatus.1=DISK_OK rdevName.1=sdb rdevSize.1=1953514552 rdevModel.1=SAMSUNG HD204UI rdevSerial.1=S2H7JD6ZB00486 rdevId.1=SAMSUNG_HD204UI_S2H7JD6ZB00486 rdevNumErrors.1=0 rdevLastIO.1=0 rdevSpinupGroup.1=0 diskNumber.2=2 diskName.2=md2 diskSize.2=1953514552 diskState.2=7 diskModel.2=SAMSUNG HD204UI diskSerial.2=S2H7JD6ZB00472 diskId.2=SAMSUNG_HD204UI_S2H7JD6ZB00472 rdevNumber.2=2 rdevStatus.2=DISK_OK rdevName.2=sdc rdevSize.2=1953514552 rdevModel.2=SAMSUNG HD204UI rdevSerial.2=S2H7JD6ZB00472 rdevId.2=SAMSUNG_HD204UI_S2H7JD6ZB00472 rdevNumErrors.2=0 rdevLastIO.2=0 rdevSpinupGroup.2=0 syslog-2011-05-09.txt
May 9, 201115 yr I installed the unraid-status-email package through unMenu yesterday in the course of building my server. It's sending me failure notifications every hour, but I'm never able to find any errors in the syslog. Right now the system is operating without a parity drive - I'm in the process of preclearing it. Could that be the problem? According to the e-mail, Disk0 (your parity disk) is disabled. (apparently you un-assigned it) You can ignore the e-mails, as you know the cause. Joe L.
May 9, 201115 yr Author Ah gotcha. I was thinking of disk 0 as /dev/sda, which is one of the data drives. Thanks for clarifying!
Archived
This topic is now archived and is closed to further replies.