My /mnt/user drive basically stops responding after 18 hours after I boot.  I am able to access each disk that makes up the /mnt/user shfs, but if I try to `ls /mnt/user`, it hangs to the point I cannot even ctrl-c out of it.  

 

root@Belfast:/mnt# mount
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
tmpfs on /dev/shm type tmpfs (rw)
tmpfs on /var/log type tmpfs (rw,size=128m,mode=0755)
/dev/sdk1 on /boot type vfat (rw,noatime,nodiratime,flush,dmask=77,fmask=177,shortname=mixed)
/boot/bzmodules on /lib/modules type squashfs (ro)
/boot/bzfirmware on /lib/firmware type squashfs (ro)
hugetlbfs on /hugetlbfs type hugetlbfs (rw)
overlay on /lib/modules type overlay (rw,lowerdir=/lib/modules,upperdir=/var/local/overlay/lib/modules,workdir=/var/local/overlay-work/lib/modules)
overlay on /lib/firmware type overlay (rw,lowerdir=/lib/firmware,upperdir=/var/local/overlay/lib/firmware,workdir=/var/local/overlay-work/lib/firmware)
/mnt on /mnt type none (rw,bind)
tmpfs on /mnt/disks type tmpfs (rw,size=1M)
tmpfs on /mnt/remotes type tmpfs (rw,size=1M)
tmpfs on /mnt/rootshare type tmpfs (rw,size=1M)
nfsd on /proc/fs/nfs type nfsd (rw)
nfsd on /proc/fs/nfsd type nfsd (rw)
/dev/md1 on /mnt/disk1 type xfs (rw,noatime)
/dev/md2 on /mnt/disk2 type xfs (rw,noatime)
/dev/md3 on /mnt/disk3 type xfs (rw,noatime)
/dev/md4 on /mnt/disk4 type xfs (rw,noatime)
/dev/md5 on /mnt/disk5 type xfs (rw,noatime)
/dev/md6 on /mnt/disk6 type xfs (rw,noatime)
/dev/md7 on /mnt/disk7 type xfs (rw,noatime)
/dev/md8 on /mnt/disk8 type xfs (rw,noatime)
/dev/md9 on /mnt/disk9 type xfs (rw,noatime)
/dev/md10 on /mnt/disk10 type xfs (rw,noatime)
/dev/sdl1 on /mnt/cache type btrfs (rw,noatime,space_cache=v2,discard=async)
/dev/nvme0n1p1 on /mnt/nvme type xfs (rw,noatime)
shfs on /mnt/user0 type fuse.shfs (rw,nosuid,nodev,noatime,allow_other)
shfs on /mnt/user type fuse.shfs (rw,nosuid,nodev,noatime,allow_other)
/mnt/cache/system/docker/docker.img on /var/lib/docker type btrfs (rw,noatime,space_cache=v2)

 

 

I try to run diagnostics, but it hung here.  

 

All my drives are spun up as well... This is my second UnRAID install and the first one went great. This one is not going well at all.  

belfast-diagnostics-20220418-1839.zip

 

Diagnostic data available after a hard reset.