Blinking cursor on boot after new mobo + cpu


Go to solution Solved by JorgeB,

Recommended Posts

Hello,

 

I have just upgraded the motherboard, cpu and ram in my machine

 

i now have a Gigabyte b660 DS3H and a Intel core i7-12700f and 64gb ddr4 3200mhz ram

 

The issue i am facing is that i cannot get the system to boot into the unraid os after following the getting started guide.

 

This usb worked previously on the old server which had different hardware

 

I have also followed another guide here trying various settings but to no avail

 

Can anyone assist?

 

 

Link to comment
16 minutes ago, CGRFC1872 said:

Hello,

 

I have just upgraded the motherboard, cpu and ram in my machine

 

i now have a Gigabyte b660 DS3H and a Intel core i7-12700f and 64gb ddr4 3200mhz ram

 

The issue i am facing is that i cannot get the system to boot into the unraid os after following the getting started guide.

 

This usb worked previously on the old server which had different hardware

 

I have also followed another guide here trying various settings but to no avail

 

Can anyone assist?

 

 

Which OS version are you running you will need 6.10 for igpu support

 

You will also need to force probe for the i915 driver have a look at the 12th Gen thread. 

 

You can do via syslinux, i915.conf in modprobe.d or install Intel gpu top, but you will need to blacklist i915 driver for this.

 

 

Link to comment
31 minutes ago, SimonF said:

Which OS version are you running you will need 6.10 for igpu support

 

You will also need to force probe for the i915 driver have a look at the 12th Gen thread. 

 

You can do via syslinux, i915.conf in modprobe.d or install Intel gpu top, but you will need to blacklist i915 driver for this.

 

 

It is a cpu without integrated graphics. It's using a seperate gpu. I found the issue was the efi- folder and thankfully that has fixed it only now i cannot access the webpage for it

Link to comment
3 hours ago, CGRFC1872 said:

It is a cpu without integrated graphics. It's using a seperate gpu. I found the issue was the efi- folder and thankfully that has fixed it only now i cannot access the webpage for it

oops missed it was a f vers. At least Jorge had the solution.

Link to comment
19 minutes ago, SimonF said:

oops missed it was a f vers. At least Jorge had the solution.

No problem, 

 

im glad it’s all working. But now half my containers and plug-ins don’t have any internet access or access to the rest of the docker network or home network so I’m needing to get that sorted but unsure on how

Link to comment
2 minutes ago, CGRFC1872 said:

No problem, 

 

im glad it’s all working. But now half my containers and plug-ins don’t have any internet access or access to the rest of the docker network or home network so I’m needing to get that sorted but unsure on how

Which Unraid vers are you running.

Link to comment
18 minutes ago, CGRFC1872 said:

Yeah, the cpu doesnt support it and neiether does the motherboard

homesrv-diagnostics-20220423-1926.zip 130.25 kB · 0 downloads

Did you old system have 2 NICs?

 

# Generated settings:
IFNAME[0]="br0"
BRNAME[0]="br0"
BRSTP[0]="no"
BRFD[0]="0"
BRNICS[0]="eth0"
PROTOCOL[0]="ipv4"
USE_DHCP[0]="yes"
DHCP_KEEPRESOLV="yes"
DNS_SERVER1="1.1.1.1"
USE_DHCP6[0]="yes"
DHCP6_KEEPRESOLV="no"
VLANS[0]="1"
IFNAME[1]="br1"
BRNAME[1]="br1"
BRNICS[1]="eth1"
BRSTP[1]="no"
BRFD[1]="0"
PROTOCOL[1]="ipv4"
USE_DHCP[1]="yes"
VLANS[1]="1"
SYSNICS="2"

It looks like you have two bridge interfaces with one trying to use eth1 which i cannot find an interface for.

 

There are two 10Gb interfaces with no active driver.

 

06:00.0 Ethernet controller [0200]: NetXen Incorporated NX3031 Multifunction 1/10-Gigabit Server Adapter [4040:0100] (rev 42)
    Subsystem: Hewlett-Packard Company NC522SFP Dual Port 10GbE Server Adapter [103c:705b]
    Kernel modules: netxen_nic
06:00.1 Ethernet controller [0200]: NetXen Incorporated NX3031 Multifunction 1/10-Gigabit Server Adapter [4040:0100] (rev 42)
    Subsystem: Hewlett-Packard Company NC522SFP Dual Port 10GbE Server Adapter [103c:705b]
    Kernel modules: netxen_nic

Link to comment
13 minutes ago, SimonF said:

Did you old system have 2 NICs?

 

# Generated settings:
IFNAME[0]="br0"
BRNAME[0]="br0"
BRSTP[0]="no"
BRFD[0]="0"
BRNICS[0]="eth0"
PROTOCOL[0]="ipv4"
USE_DHCP[0]="yes"
DHCP_KEEPRESOLV="yes"
DNS_SERVER1="1.1.1.1"
USE_DHCP6[0]="yes"
DHCP6_KEEPRESOLV="no"
VLANS[0]="1"
IFNAME[1]="br1"
BRNAME[1]="br1"
BRNICS[1]="eth1"
BRSTP[1]="no"
BRFD[1]="0"
PROTOCOL[1]="ipv4"
USE_DHCP[1]="yes"
VLANS[1]="1"
SYSNICS="2"

It looks like you have two bridge interfaces with one trying to use eth1 which i cannot find an interface for.

 

There are two 10Gb interfaces with no active driver.

 

06:00.0 Ethernet controller [0200]: NetXen Incorporated NX3031 Multifunction 1/10-Gigabit Server Adapter [4040:0100] (rev 42)
    Subsystem: Hewlett-Packard Company NC522SFP Dual Port 10GbE Server Adapter [103c:705b]
    Kernel modules: netxen_nic
06:00.1 Ethernet controller [0200]: NetXen Incorporated NX3031 Multifunction 1/10-Gigabit Server Adapter [4040:0100] (rev 42)
    Subsystem: Hewlett-Packard Company NC522SFP Dual Port 10GbE Server Adapter [103c:705b]
    Kernel modules: netxen_nic

Yeah,

 

The old system did. This one is supposed to have one 10gb nic and 1gb nic but the dac cable doesnt work so i've had to order another

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.