I was looking for a way to speed up the refresh of the stats on the MAIN page while troubleshooting. It seems to me that it's fixed at 10 sec.

 

I found posts talking about "Page Update Frequency" under the display settings but I can't see that on my 6.9.2 install.

 

Has that been removed? Is there any other way to speed up the refresh, even just for a while to troubleshoot transfer speeds? I keep getting conflicting data from the sending system to the UNRAID server.

 

What version of Unraid are you using?

 

Page Update Frequency is something from the past, current versions have real-time screen updates.

 

6.9.2 I just bought yesterday. The dashboard is a little quicker to update. That's about a 1-2 second refresh rate. But the Main page is about 5-10 seconds between updates.

 

I'm running on a Dell R510 12 bay

Here's my stats from info

 

Model: Custom

M/B: Dell Inc. 084YMW Version A04 - s/n: ..CN1374018300G3.

BIOS: Dell Inc. Version 1.12.0. Dated: 07/26/2013

CPU: Intel® Xeon® CPU X5570 @ 2.93GHz x 2

HVM: Enabled

IOMMU: Enabled

Cache: 128 KiB, 1 MB, 8 MB, 128 KiB, 1 MB, 8 MB

Memory: 32 GiB DDR3 Multi-bit ECC (max. installable capacity 128 GiB)

Network: bond0: IEEE 802.3ad Dynamic link aggregation, mtu 9000
 eth0: 1000 Mbps, full duplex, mtu 9000
 eth1: 1000 Mbps, full duplex, mtu 9000
 eth2: 1000 Mbps, full duplex, mtu 9000
 eth3: 1000 Mbps, full duplex, mtu 9000

Kernel: Linux 5.10.28-Unraid x86_64

OpenSSL: 1.1.1j

Uptime: 

It's just finishing up a preclear on a new disk. Looking at the timer on the post read, it is refreshing about every 6 seconds.

The update frequency of preclear is determined by the preclear plugin.

Different parts of the GUI have different update frequencies, Unraid version 6.10 uses an event driven model to do updates, you may want to upgrade.

Note version 6.10 is currently a release candidate, but stable enough to use.

 

Recording

 

 

Edited April 23, 20224 yr by aglyons

In 6.10 the read/write speeds are updated every 2 seconds.