aglyons Posted April 23, 2022 Share Posted April 23, 2022 I was looking for a way to speed up the refresh of the stats on the MAIN page while troubleshooting. It seems to me that it's fixed at 10 sec. I found posts talking about "Page Update Frequency" under the display settings but I can't see that on my 6.9.2 install. Has that been removed? Is there any other way to speed up the refresh, even just for a while to troubleshoot transfer speeds? I keep getting conflicting data from the sending system to the UNRAID server. Quote Link to comment
bonienl Posted April 23, 2022 Share Posted April 23, 2022 What version of Unraid are you using? Page Update Frequency is something from the past, current versions have real-time screen updates. Quote Link to comment
aglyons Posted April 23, 2022 Author Share Posted April 23, 2022 6.9.2 I just bought yesterday. The dashboard is a little quicker to update. That's about a 1-2 second refresh rate. But the Main page is about 5-10 seconds between updates. I'm running on a Dell R510 12 bay Here's my stats from info Model: Custom M/B: Dell Inc. 084YMW Version A04 - s/n: ..CN1374018300G3. BIOS: Dell Inc. Version 1.12.0. Dated: 07/26/2013 CPU: Intel® Xeon® CPU X5570 @ 2.93GHz x 2 HVM: Enabled IOMMU: Enabled Cache: 128 KiB, 1 MB, 8 MB, 128 KiB, 1 MB, 8 MB Memory: 32 GiB DDR3 Multi-bit ECC (max. installable capacity 128 GiB) Network: bond0: IEEE 802.3ad Dynamic link aggregation, mtu 9000 eth0: 1000 Mbps, full duplex, mtu 9000 eth1: 1000 Mbps, full duplex, mtu 9000 eth2: 1000 Mbps, full duplex, mtu 9000 eth3: 1000 Mbps, full duplex, mtu 9000 Kernel: Linux 5.10.28-Unraid x86_64 OpenSSL: 1.1.1j Uptime: Quote Link to comment
aglyons Posted April 23, 2022 Author Share Posted April 23, 2022 It's just finishing up a preclear on a new disk. Looking at the timer on the post read, it is refreshing about every 6 seconds. Quote Link to comment
bonienl Posted April 23, 2022 Share Posted April 23, 2022 The update frequency of preclear is determined by the preclear plugin. Different parts of the GUI have different update frequencies, Unraid version 6.10 uses an event driven model to do updates, you may want to upgrade. Note version 6.10 is currently a release candidate, but stable enough to use. Quote Link to comment
aglyons Posted April 23, 2022 Author Share Posted April 23, 2022 (edited) Recording Edited April 23, 2022 by aglyons Quote Link to comment
Solution bonienl Posted April 23, 2022 Solution Share Posted April 23, 2022 In 6.10 the read/write speeds are updated every 2 seconds. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.