April 29, 20224 yr I recently had to replace the main flash drive UnRaid is installed on, and while the transfer to the new flash drive was relatively painless, I'm having trouble getting the docker apps to work... They show up on the docker list, but I'm unable to start them, or restore them from a backup.
April 29, 20224 yr Community Expert Did you copy your configuration to the new flash? Attach diagnostics to your NEXT post in this thread.
April 30, 20224 yr Community Expert The config folder from your old flash or flash backup. Everything about your configuration is in that folder. Without that you are basically setting up everything from scratch.
April 30, 20224 yr Author Success!! I was able to still access the files in the config folder of the failing drive and copy it's contents to the new flash drive... Thank you your help!
April 30, 20224 yr Community Expert 19 minutes ago, RGauld said: the config folder of the failing drive Lucky you. You must always keep a current backup of flash. You can download a zipped flash backup from Main - Boot Device - Flash - Flash Backup. The My Servers plugin will keep a current flash backup on Unraid cloud.
April 30, 20224 yr Community Expert 13 hours ago, RGauld said: bear with the noob Some other important things. Do you have Notifications setup to alert you immediately by email or other agent as soon as a problem is detected? Don't allow an unnoticed problem become multiple problems that are difficult to recover from. Do you have another copy of anything important and irreplaceable? Parity is not a substitute for backups. And, if you 15 hours ago, trurl said: Attach diagnostics to your NEXT post in this thread we could take a look at your configuration to give further advice.
April 30, 20224 yr Community Expert Your configuration looks good. I didn't check SMART reports for your disks since there wasn't any other reason to suspect problems. Do any have SMART warnings on the Dashboard page? I see you have been a forum member for several years so not really a noob.
May 1, 20224 yr Author No, I have no warnings on the dashboard... I do see this a lot in the log file, it appears over and over: "May 1 07:44:14 RG-SERVER rsyslogd: omfwd/udp: socket 5: sendto() error: Network is unreachable [v8.2102.0 try https://www.rsyslog.com/e/2354" and this: "May 1 07:44:14 RG-SERVER kernel: ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [CPB3] at bit offset/length 64/32 exceeds size of target Buffer (64 bits) (20210730/dsopcode-198)" "May 1 07:44:17 RG-SERVER kernel: bond0: Warning: No 802.3ad response from the link partner for any adapters in the bond" "May 1 07:45:39 RG-SERVER emhttpd: Warning: Invalid argument supplied for foreach() in /usr/local/emhttp/plugins/customtab/scripts/createTab.php on line 33" I'm posting my diagnostics again as well as my syslog... And no, I guess I'm not quite a noob, but I'm no master either! rg-server-diagnostics-20220501-0907.zip rg-server-syslog-20220501-1505.zip
May 1, 20224 yr Community Expert 5 hours ago, RGauld said: "May 1 07:44:14 RG-SERVER rsyslogd: omfwd/udp: socket 5: sendto() error: Network is unreachable [v8.2102.0 try https://www.rsyslog.com/e/2354" Do you have Syslog Server enabled? If so post a screenshot of that.
May 7, 20224 yr Author I don't have it enabled, but I will re-enable it and post it when it's ready to upload...
May 14, 20224 yr Author sorry for the delay... here is my syslog and a new diagnostics... rg-server-diagnostics-20220514-0832.zip syslog.log
June 5, 20224 yr Author anyone? it appears over and over: "May 1 07:44:14 RG-SERVER rsyslogd: omfwd/udp: socket 5: sendto() error: Network is unreachable [v8.2102.0 try https://www.rsyslog.com/e/2354" and this: "May 1 07:44:14 RG-SERVER kernel: ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [CPB3] at bit offset/length 64/32 exceeds size of target Buffer (64 bits) (20210730/dsopcode-198)" "May 1 07:44:17 RG-SERVER kernel: bond0: Warning: No 802.3ad response from the link partner for any adapters in the bond" "May 1 07:45:39 RG-SERVER emhttpd: Warning: Invalid argument supplied for foreach() in /usr/local/emhttp/plugins/customtab/scripts/createTab.php on line 33"
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.