May 9, 20224 yr Hey all, I had the latest Unraid RC running for a few days in preparation of my new build. I put everything together and watched the BIOS post and HDDs get detected successfully. I configured the BIOS to boot of USB first and ensured UEFI was enabled. I added my USB stick from my old machine and unfortunately went right back to BIOS. I followed some of the tips and tricks on the Getting Started guide but none seemed to work. I have not removed the SATA drives as that will be next step tomorrow, but wanted to check here first to see if there are BIOS settings I need to modify to get it to work. Here is the build I have, https://pcpartpicker.com/user/ryphez/saved/nHQfdC. I'm open to trying a different USB drive with Unraid on it and restoring from a backup if need be too!
May 9, 20224 yr Community Expert Solution Couple of things to try: Make sure secure boot is disabled in bios If you need to enable UEFI boot, rename the EFI- directory to EFI
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.