Unstable after swapping hardware. Need help diagnosing.

[35827521039]

Hello, I'm in need of some help trying to figure out what is causing the "Machine Check Events detected on your server" that is showing up with the Fix Common Problems plugin.

 

I recently swapped hardware, so if I can't resolve the issue I may just revert back.

- Things changed - Swapped CPU/Motherboard/RAM; Removed expansion card & GPU.

 

Current Setup:

Unraid Version: 6.9.2

CPU: Intel i3-10400

Motherboard: Gigabyte Z590 VISION D
Memory: CORSAIR Vengeance LPX 16GB (CMK16GX4M2B3200C16)

PSU: Corsair 550w

 

Old Hardware:

CPU: Intel G4560

Motherboard: MSI C236M WORKSTATION

Memory: SK 2133 ECC (I forget what model)

Addon Card: Generic PCI SATA Expansion card

GPU: Quadro P400

 

I understand I probably have more issues, but I first need a starting point.

 

Server boots with the Machine Check Events issue, can work fine for a few days but then will become unresponsive and requires a hard reboot. Was not an issue before the swap in hardware. When I first swapped, the motherboard would not boot into my original USB with Unraid, but after messing around with the BIOS I finally got it set up. Unsure if that could be related.

 

Please advise on the next steps I should take. I've attached my diagnostics but am unable to provide anything from right before the server becomes unresponsive.

 

Thanks

t-70-diagnostics-20220514-1611.zip

[JorgeB]

Could be this issue:

Also a good idea to run memtest.