MrLondon Posted May 16, 2022 Share Posted May 16, 2022 Hi there, I can see in my syslog lots of these error message May 16 10:53:43 Tower kernel: ata2.00: status: { DRDY } May 16 10:53:43 Tower kernel: ata2.00: failed command: READ FPDMA QUEUED May 16 10:53:43 Tower kernel: ata2.00: cmd 60/08:30:b0:89:2c/00:00:43:00:00/40 tag 6 ncq dma 4096 in May 16 10:53:43 Tower kernel: res 40/00:00:a8:2d:79/00:00:00:00:00/40 Emask 0x10 (ATA bus error) May 16 10:53:43 Tower kernel: ata2.00: status: { DRDY } May 16 10:53:43 Tower kernel: ata2.00: failed command: WRITE FPDMA QUEUED May 16 10:53:43 Tower kernel: ata2.00: cmd 61/00:a8:a8:29:79/04:00:00:00:00/40 tag 21 ncq dma 524288 out May 16 10:53:43 Tower kernel: res 40/00:00:a8:2d:79/00:00:00:00:00/40 Emask 0x10 (ATA bus error) May 16 10:53:43 Tower kernel: ata2.00: status: { DRDY } May 16 10:53:43 Tower kernel: ata2.00: failed command: WRITE FPDMA QUEUED May 16 10:53:43 Tower kernel: ata2.00: cmd 61/68:b0:a8:2d:79/02:00:00:00:00/40 tag 22 ncq dma 315392 out May 16 10:53:43 Tower kernel: res 40/00:00:a8:2d:79/00:00:00:00:00/40 Emask 0x10 (ATA bus error) May 16 10:53:43 Tower kernel: ata2.00: status: { DRDY } May 16 10:53:43 Tower kernel: ata2: hard resetting link May 16 10:53:49 Tower kernel: ata2: link is slow to respond, please be patient (ready=0) May 16 10:53:53 Tower kernel: ata2: COMRESET failed (errno=-16) May 16 10:53:53 Tower kernel: ata2: hard resetting link May 16 10:53:54 Tower kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) May 16 10:53:54 Tower kernel: ata2.00: supports DRM functions and may not be fully accessible is this from the SAS controller or a specific drive? any help greatly appreciated. tower-diagnostics-20220516-1055.zip Quote Link to comment
MrLondon Posted May 16, 2022 Author Share Posted May 16, 2022 if I understand the logs correctly it appears to affect my first parity disk, do I understand this correctly? ata2.00: ATA-9: WDC WD140EDFZ-11A0VA0, 81.00A81, max UDMA/133 Quote Link to comment
JorgeB Posted May 16, 2022 Share Posted May 16, 2022 Looks more like a power/connection problem, check/replace/swap cables on parity2. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.