Skip to content
View in the app

A better way to browse. Learn more.

Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

[SOLVED] Syslog/Smart status errors

Featured Replies

I'm new to unRAID and just built my first server. I started preclearing my disks for several cycles last night and this morning my log showed some new errors. It looks like its from my sde drive. should I be worried? I've attached my syslog and also posted the SMART statue of sde. Running 4.7 Pro

 

May 17 02:35:20 Tower kernel: ata6.00: exception Emask 0x50 SAct 0x7fffffbf SErr 0x400800 action 0x6 frozen (Errors)
May 17 02:35:20 Tower kernel: ata6.00: irq_stat 0x08000000, interface fatal error (Errors)
May 17 02:35:20 Tower kernel: ata6: SError: { HostInt Handshk } (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6.00: failed command: WRITE FPDMA QUEUED (Minor Issues)
May 17 02:35:20 Tower kernel:          res 50/00:a0:d0:d6:99/00:00:7f:00:00/40 Emask 0x50 (ATA bus error) (Errors)
May 17 02:35:20 Tower kernel: ata6: hard resetting link (Minor Issues)

 

I also found these but I think they can be ignored:

May 16 16:25:33 Tower kernel: ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 (20090903/tbfadt-557) (Minor Issues)
May 16 16:25:33 Tower kernel: ACPI Error (psargs-0359): [ECEN] Namespace lookup failure, AE_NOT_FOUND (Minor Issues)
May 16 16:25:33 Tower kernel: ACPI Error (psparse-0537): Method parse/execution failed [\] (Node c14760c8), AE_NOT_FOUND (Minor Issues)
May 16 16:25:33 Tower kernel: ACPI Warning: Incorrect checksum in table [OEMB] - A0, should be 9F (20090903/tbutils-314) (Minor Issues)
May 16 16:25:33 Tower kernel: scst: ***WARNING***: Patch io_context was not applied on your kernel. SCST will be working with not the best performance. (Minor Issues)
May 16 16:25:33 Tower kernel: WARNING: at fs/proc/generic.c:590 proc_register+0x11c/0x14b() (Minor Issues)
May 16 16:25:33 Tower kernel: Pid: 766, comm: modprobe Not tainted 2.6.32.9-unRAID #8 (Errors)
May 16 16:25:33 Tower kernel: Call Trace: (Errors)
May 16 16:25:33 Tower kernel:  [<c102449e>] warn_slowpath_common+0x60/0x77 (Errors)
May 16 16:25:33 Tower kernel:  [<c10244e9>] warn_slowpath_fmt+0x24/0x27 (Errors)
May 16 16:25:33 Tower kernel:  [<c109cf0e>] proc_register+0x11c/0x14b (Errors)
May 16 16:25:33 Tower kernel:  [<c109d0cc>] proc_mkdir_mode+0x2f/0x43 (Errors)
May 16 16:25:33 Tower kernel:  [<c109d0ef>] proc_mkdir+0xf/0x11 (Errors)
May 16 16:25:33 Tower kernel:  [<f8462d5d>] mvst_init+0x3b/0x5b [mvsas] (Errors)
May 16 16:25:33 Tower kernel:  [<f8467895>] mvs_pci_init+0xaa5/0xaf7 [mvsas] (Errors)
May 16 16:25:33 Tower kernel:  [<c10062d9>] ? dma_generic_alloc_coherent+0x0/0xdb (Errors)
May 16 16:25:33 Tower kernel:  [<c1142050>] local_pci_probe+0xe/0x10 (Errors)
May 16 16:25:33 Tower kernel:  [<c11426ad>] pci_device_probe+0x48/0x66 (Errors)
May 16 16:25:33 Tower kernel:  [<c1194956>] driver_probe_device+0x79/0xed (Errors)
May 16 16:25:33 Tower kernel:  [<c1194a0d>] __driver_attach+0x43/0x5f (Errors)
May 16 16:25:33 Tower kernel:  [<c11940a7>] bus_for_each_dev+0x39/0x5a (Errors)
May 16 16:25:33 Tower kernel:  [<f846f000>] ? mvs_init+0x0/0x45 [mvsas] (Errors)
May 16 16:25:33 Tower kernel:  [<c119482f>] driver_attach+0x14/0x16 (Errors)
May 16 16:25:33 Tower kernel:  [<c11949ca>] ? __driver_attach+0x0/0x5f (Errors)
May 16 16:25:33 Tower kernel:  [<c119451c>] bus_add_driver+0x9f/0x1c5 (Errors)
May 16 16:25:33 Tower kernel:  [<f846f000>] ? mvs_init+0x0/0x45 [mvsas] (Errors)
May 16 16:25:33 Tower kernel:  [<c1194ccf>] driver_register+0x7b/0xd7 (Errors)
May 16 16:25:33 Tower kernel:  [<f846f000>] ? mvs_init+0x0/0x45 [mvsas] (Errors)
May 16 16:25:33 Tower kernel:  [<c1142882>] __pci_register_driver+0x39/0x8c (Errors)
May 16 16:25:33 Tower kernel:  [<f846f000>] ? mvs_init+0x0/0x45 [mvsas] (Errors)
May 16 16:25:33 Tower kernel:  [<f846f030>] mvs_init+0x30/0x45 [mvsas] (Errors)
May 16 16:25:33 Tower kernel:  [<c1001139>] do_one_initcall+0x4c/0x131 (Errors)
May 16 16:25:33 Tower kernel:  [<c1042e6e>] sys_init_module+0xa7/0x1dd (Errors)
May 16 16:25:33 Tower kernel:  [<c1002935>] syscall_call+0x7/0xb (Errors)
May 16 16:25:33 Tower kernel: atiixp 0000:00:14.1: simplex device: DMA disabled (Errors)
May 16 16:25:33 Tower kernel: ide1: DMA disabled (Errors)
May 16 16:25:36 Tower emhttp: shcmd (6): killall -HUP smbd (Minor Issues)

 

 

 

 

syslog-2011-05-17.txt

  • Author

I decided to check the SMART status of my drive and found 1 to have errors:

SMART status Info for /dev/sde

smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     Hitachi HDS5C3020ALA632
Serial Number:    ML0220F30VX40D
Firmware Version: ML6OA580
User Capacity:    2,000,398,934,016 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Tue May 17 10:22:05 2011 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84)	Offline data collection activity
				was suspended by an interrupting command from host.
				Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
				without error or no self-test has ever 
				been run.
Total time to complete Offline 
data collection: 		 (23645) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
				Auto Offline data collection on/off support.
				Suspend Offline collection upon new
				command.
				Offline surface scan supported.
				Self-test supported.
				No Conveyance Self-test supported.
				Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
				power-saving mode.
				Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
				General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 255) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
				SCT Feature Control supported.
				SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
 1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
 2 Throughput_Performance  0x0005   132   132   054    Pre-fail  Offline      -       109
 3 Spin_Up_Time            0x0007   100   100   024    Pre-fail  Always       -       328
 4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       7
 5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
 7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
 8 Seek_Time_Performance   0x0005   146   146   020    Pre-fail  Offline      -       29
 9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       87
10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       7
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       7
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       7
194 Temperature_Celsius     0x0002   200   200   000    Old_age   Always       -       30 (Lifetime Min/Max 22/32)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       2

SMART Error Log Version: 1
ATA Error Count: 2
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2 occurred at disk power-on lifetime: 79 hours (3 days + 7 hours)
 When the command that caused the error occurred, the device was active or idle.

 After command completion occurred, registers were:
 ER ST SC SN CL CH DH
 -- -- -- -- -- -- --
 84 51 00 80 7e 99 0f

 Commands leading to the command that caused the error were:
 CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
 -- -- -- -- -- -- -- --  ----------------  --------------------
 61 a0 28 d0 d6 99 40 08      10:08:00.290  WRITE FPDMA QUEUED
 61 00 20 d0 d2 99 40 08      10:08:00.290  WRITE FPDMA QUEUED
 61 00 18 d0 ce 99 40 08      10:08:00.286  WRITE FPDMA QUEUED
 61 00 10 d0 ca 99 40 08      10:08:00.286  WRITE FPDMA QUEUED
 61 00 08 d0 c6 99 40 08      10:08:00.282  WRITE FPDMA QUEUED

Error 1 occurred at disk power-on lifetime: 79 hours (3 days + 7 hours)
 When the command that caused the error occurred, the device was active or idle.

 After command completion occurred, registers were:
 ER ST SC SN CL CH DH
 -- -- -- -- -- -- --
 84 51 10 70 7f 99 0f

 Commands leading to the command that caused the error were:
 CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
 -- -- -- -- -- -- -- --  ----------------  --------------------
 61 a0 28 d0 d6 99 40 08      10:08:00.290  WRITE FPDMA QUEUED
 61 00 20 d0 d2 99 40 08      10:08:00.290  WRITE FPDMA QUEUED
 61 00 18 d0 ce 99 40 08      10:08:00.286  WRITE FPDMA QUEUED
 61 00 10 d0 ca 99 40 08      10:08:00.286  WRITE FPDMA QUEUED
 61 00 08 d0 c6 99 40 08      10:08:00.282  WRITE FPDMA QUEUED

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
   1        0        0  Not_testing
   2        0        0  Not_testing
   3        0        0  Not_testing
   4        0        0  Not_testing
   5        0        0  Not_testing
Selective self-test flags (0x0):
 After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

  • Author

Here's the SMART status Info for /dev/sdd

 

smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     ST2000DL003-9VT166
Serial Number:    6YD05AZD
Firmware Version: CC32
User Capacity:    2,000,398,934,016 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Tue May 17 20:37:29 2011 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
				was completed without error.
				Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
				without error or no self-test has ever 
				been run.
Total time to complete Offline 
data collection: 		 ( 612) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
				Auto Offline data collection on/off support.
				Suspend Offline collection upon new
				command.
				Offline surface scan supported.
				Self-test supported.
				Conveyance Self-test supported.
				Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
				power-saving mode.
				Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
				General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 255) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x30b7)	SCT Status supported.
				SCT Feature Control supported.
				SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   111   099   006    Pre-fail  Always       -       40757696
  3 Spin_Up_Time            0x0003   096   096   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       4
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   100   253   030    Pre-fail  Always       -       843294
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       28
10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       4
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   069   069   045    Old_age   Always       -       31 (Lifetime Min/Max 27/31)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       3
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       4
194 Temperature_Celsius     0x0022   031   040   000    Old_age   Always       -       31 (0 25 0 0)
195 Hardware_ECC_Recovered  0x001a   036   027   000    Old_age   Always       -       40757696
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       273142740156444
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       3060199144
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       2321341914

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

 

 

The report looks ok. It could be a cable, power, or port problem.

  • Author

Thanks for taking a look, got a little worried when I saw the errors.

Archived

This topic is now archived and is closed to further replies.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.