Frefle Posted May 23, 2022 Share Posted May 23, 2022 (edited) Hi there, i updated my Unraid Server with new/old hardware (Mainboard, CPU RAM from my old computer) Since i installed my old M.2 1TB Samsung SSD as chache drive, Unraid is running for a few hours and then isn't able to reach the webinterface and i can't ping it. the Strange thing, without load the M.2 SSD is running at about 70c°syslog.txt. Stops Unraid because of M.2 Overtemperature? i am Using an Asrock Fatal1ty x370 itx with Ryzen 7 1700, 16GB G-Skill RAM, 1TB Samsung M.2 SSD, 2x WD 8TB, 2x WD 4TB. In the Moment there are running 10 Dockers and no VMs edit: i dismantled the system and put a thermal pad between m.2 ssd and mainboard, the Temperatur is now at about 44c°. after an hour the system again wasn't reachable Edited May 23, 2022 by Frefle Quote Link to comment
Solution Squid Posted May 23, 2022 Solution Share Posted May 23, 2022 5 hours ago, Frefle said: Ryzen 7 1700 First starting point is Quote Link to comment
Frefle Posted May 23, 2022 Author Share Posted May 23, 2022 (edited) thank you very much. I have configured typical current idle and test it for today. in the last days it was running about 1-12 Hours. If it doesn't work i will try the bios update (i hate bios updates, had a laptop many years ago, bios update called succsess, laptop won't boot again) Ram isn't overclocked, i wanted to, but had many problems (first gen of ryzen wasn't easy to ram overclock) Edited May 23, 2022 by Frefle Quote Link to comment
Squid Posted May 23, 2022 Share Posted May 23, 2022 12 minutes ago, Frefle said: Ram isn't overclocked, Just be aware that XMP is an overclock. Quote Link to comment
Frefle Posted May 23, 2022 Author Share Posted May 23, 2022 jep xmp is deaktivated i had problems with bluescreens every time i activated it. Thank you Quote Link to comment
Frefle Posted May 24, 2022 Author Share Posted May 24, 2022 aww uptime 14 hours, it seems typical current idle did the trick. Thank you sooo much! i let the server run till tomorrow and if there are no more problems i would like to close this thread. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.