I build a unraid server with older hardware. I have really enjoyed the whole experience. I created a few shares and started transferring some media files over. Im waiting for some larger hdds to arrive and a new case, so I've just been tinkering around with learning how to set up VMs, and Dockers to gain experience for when i built the permanent server.  The next day i noticed the server doing another pairty check. I learned that happens as a result of unclean shutdown and determined that to be the case. 

 

I think i've narrowed it down to either my cpu, a Ryzen 3 1200, or my power supply. Most recently I ran prime 95 on the server. oddly enough it ran fine for about 15 minutes, and it wasn't until i canceled the stress test that it rebooted about a minute later. 

 

I've included some of the syslog, I had it building a file for over a week and didnt want to share a 4mb log. Hopefully it has some information that is useful. If theres something better i can provide please let me know. I want to rule out any software issues before i order any replacement parts.  Thank you all for your dedication.

 

Ps. If you believe it to be the cpu, do you recon i should order a new one, or scrap the idea of using the AM4 motherboard and just move to an intel based system?

 

Thanks again for taking the time.

 

CPU: Ryzen 3 1200 14nm

Motherboard: ASRock AB350 Pro4 ATX AM4

Ram:2x8gb XPG Z1 DDR4 3200MHz

PSU: coolermaster MVE bronze 500

GPU: Zotac 1070 mini (could be removed, i just used it for the initial install and left it in)

 

syslog.txt

attach diagnostics to your NEXT post in this thread

 

also

 

1 hour ago, trurl said:

attach diagnostics to your NEXT post in this thread

 

also

 

Thank you for the link. i will check it out, i will post diagnostics now. If i need to wait for a crash just let me know

unraidtower-diagnostics-20220607-2319.zip

Your configuration looks good. Diagnostics includes syslog since last boot. Setup syslog server so you can get syslog from before a crash.

just set it up and then rebooted. as soon as i have my next crash i will upload. Thank you very much.

Ive attached syslog. it looks like it crashed after about 3 hours last night.  I noticed clock unsynchronized so i'm going to buy a replacement cmos battery today.

syslog

I replaced the power supply, and i replaced the Cmos battery. We will see if that makes any difference. If not, i do have a 10700k that is currently in a prebuilt HP Omen 30L. I could buy a new motherboard and use that for my server if need be.

just to update, i found another setting in the bios about c states so i disabled that, previously i disabled a c6 setting. Hopefully it will make a difference. Its been on for about 20 hours now so fingers crossed.

I fixed it, it was either the power supply, or the other setting for C States that i found buried in the Advanced settings of the motherboard.