momov587 Posted June 8, 2022 Share Posted June 8, 2022 (edited) 目前使用的CPU是i5 11400.之前使用6.9.2视频硬解会死机,现在升级到6.10.2已经没问题了。。但是现在用的照片程序photoview还是PhotoPrism. 再开始扫描照片后,突然cpu使用暴增,,温度暴增,,导致死机!!请问下,如何解决?是新的驱动还不支持吗? Edited June 8, 2022 by momov587 Quote Link to comment
atim520 Posted June 8, 2022 Share Posted June 8, 2022 我的NAS使用11400的U,华硕B560PLUS的主板,视频硬解正常、photoprism使用正常,扫描、索引照片正常、没你说的问题,当然我的照片库小,不知道照片如果成千上万张扫描、索引有问题没有 Quote Link to comment
atim520 Posted June 8, 2022 Share Posted June 8, 2022 另外我觉得你提的问题需要说明到底是photoprism运行导致unraid死机还是u的温度太高导致unraid死机,按理说如果u的温度过高会导致降频,不该死机呀 Quote Link to comment
CentWind Posted June 9, 2022 Share Posted June 9, 2022 先试试把photoprism限制CPU核心数,这东西巨吃CPU的吧我记得。至少别让CPU撞100度先,看看还会蚌吗。 Quote Link to comment
Solution lyqalex Posted June 15, 2022 Solution Share Posted June 15, 2022 On 6/8/2022 at 5:12 PM, momov587 said: 目前使用的CPU是i5 11400.之前使用6.9.2视频硬解会死机,现在升级到6.10.2已经没问题了。。但是现在用的照片程序photoview还是PhotoPrism. 再开始扫描照片后,突然cpu使用暴增,,温度暴增,,导致死机!!请问下,如何解决?是新的驱动还不支持吗? 这个问题可能需要考虑cpu散热是否出现问题,检查一下散热风扇是否安装合适。 Quote Link to comment
momov587 Posted June 16, 2022 Author Share Posted June 16, 2022 感谢各位。测试后果然是散热问题。目前已经更换机箱解决了 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.