Userpaul Posted May 23, 2011 Share Posted May 23, 2011 unRAID Server Pro version: 4.7 Hi guys I had an issue whilst rebooting my server and had to switch of the server using the power button several times to restart. I had a problem with one of my 8 port sata cards and the server was hanging at boot. (fixed now) The parity check has completed with no errors showing in the right column on the unRaid menu but i am showing 34 sync errors. I have searched the forum for information on this but i am still unclear on what I should do at this point. Any advice would be appreciated. Should i re run parity check again Run reiserfsck Thank you Syslog attached 34_errors.txt Quote Link to comment
prostuff1 Posted May 23, 2011 Share Posted May 23, 2011 The 34 sync errors are probably because of the unclean shutdown. You will have to run a correcting check to get everything back in sync. Quote Link to comment
Userpaul Posted May 23, 2011 Author Share Posted May 23, 2011 The 34 sync errors are probably because of the unclean shutdown. You will have to run a correcting check to get everything back in sync. Thanks prostuff1 I thought the default parity check was correcting? If the correcting check is a different option where do I find it? Quote Link to comment
prostuff1 Posted May 23, 2011 Share Posted May 23, 2011 The 34 sync errors are probably because of the unclean shutdown. You will have to run a correcting check to get everything back in sync. Thanks prostuff1 I thought the default parity check was correcting? If the correcting check is a different option where do I find it? crap, you are correct. I did not pay attention to the version of unRAID you were running (I am running 5.0b and I kind of assumed you were). Anyway, the sync errors were still likely related to the unclean shutdown. I would run another parity check and there should NOT be any errors found this time around. Quote Link to comment
kizer Posted May 23, 2011 Share Posted May 23, 2011 Yes the last time I had parity errors. 200 of them or so I just did another parity check and I was good to go. Quote Link to comment
Userpaul Posted May 24, 2011 Author Share Posted May 24, 2011 Hi I have run the parity check again and i have the same messages Unraid main .. (Last checked on 5/24/2011 11:50:04 AM, finding 34 errors.) But I have no errors showing in the right hand errors column In mymain ..STARTED, 18 disks in array. Parity is Valid:. Last parity check < 1 day ago . Parity updated 34 times to address sync errors. I'm a little confused, have the sync errors been corrected? Syslog attached Thank you syslog-2011-05-24.txt Quote Link to comment
prostuff1 Posted May 24, 2011 Share Posted May 24, 2011 It should have been corrected. try running another check and see what happens this time around. Quote Link to comment
Userpaul Posted May 24, 2011 Author Share Posted May 24, 2011 It should have been corrected. try running another check and see what happens this time around. 3rd Run has corrected it Thank you Quote Link to comment
prostuff1 Posted May 24, 2011 Share Posted May 24, 2011 It should have been corrected. try running another check and see what happens this time around. 3rd Run has corrected it Thank you Good to here Quote Link to comment
lionelhutz Posted May 24, 2011 Share Posted May 24, 2011 Personally, I'd want to see at least 2 runs in a row without errors after having errors 2 times in a row. Peter Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.