12代cpu,i5-12600t+铭瑄b660m终结者主板使用问题


Go to solution Solved by Vr2Io,

Recommended Posts

白裙整明白了,然后就放在那里做个照片备份的小东西了

为了折腾,最近趁618组了一台新的机器跑unraid,配置为i5-12600t+铭瑄b660m终结者主板,电源是海韵的focus750,散热是塔式猫扇,内存是金士顿16g x4,显卡是蓝宝石6500xt,供电散热内存应该是没什么问题的,现在分析以下问题估计是cpu和主板带来的

906771482_2022-06-1917_08_23.thumb.png.1c62f87bdfe3e64c0c60e9c8358b70ff.png

之前用8100的时候这里显示的是显卡型号,为何unraid6.10.3不显示UHD770,是因为现在还没有完整的驱动吗?

 

另外一个问题就是在开机之后几分钟之内日志会被以下信息占满,日志也显示百分百,研究了很多天没结果,麻烦问下各位这是什么原因造成的,不太看的懂这是哪个pcie设备

 

PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID) Jun 8 23:11:21 Tower kernel: pcieport 0000:00:1d.0: device [8086:7ab6] error status/mask=00000080/00002000

 

PCI 设备和 IOMMU 组信息如下

1807037335_2022-06-1917_16_07.thumb.png.3c818f5fbc4be284a88e01c42f523084.png

1977719146_2022-06-1917_16_17.thumb.png.bbf47f1e1f510c1d65477dbb064b934b.png

Link to comment

是升级还是重新做启动U盘系统?

1、升级前要把旧主机设置清理,包括直通设置和docker,vms的相关硬件勾选。可以考虑重新制作系统U盘。

2、把硬件重新插拔一下,先以最少硬件运行,如内存只插一根,把amd这款显卡去掉测试。然后逐渐增加硬件。

Link to comment
14 hours ago, lyqalex said:

是升级还是重新做启动U盘系统?

1、升级前要把旧主机设置清理,包括直通设置和docker,vms的相关硬件勾选。可以考虑重新制作系统U盘。

2、把硬件重新插拔一下,先以最少硬件运行,如内存只插一根,把amd这款显卡去掉测试。然后逐渐增加硬件。

都试过,6.10.2没毛病,然后6.10.3rc1也没,就是升级了6.10.3之后出现的这问题

Link to comment

你可以用 lspci -Pvt 看看是否 NVMe 接上 root port 1d.0 (SN750), 如是, 即表示它們之間出了問題.

 

lspci  -Pvt

-[0000:00]-+-00.0  Intel Corporation 8th/9th Gen Core 8-core Desktop Processor Host Bridge/DRAM Registers [Coffee Lake S]
           +-01.0-[01]----00.0  Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection
           +-02.0  Intel Corporation CoffeeLake-S GT2 [UHD Graphics 630]
           +-14.0  Intel Corporation 200 Series/Z370 Chipset Family USB 3.0 xHCI Controller
           +-14.2  Intel Corporation 200 Series PCH Thermal Subsystem
           +-16.0  Intel Corporation 200 Series PCH CSME HECI #1
           +-17.0  Intel Corporation 200 Series PCH SATA controller [AHCI mode]
           +-1d.0-[02]----00.0  Sandisk Corp WD Blue SN550 NVMe SSD
           +-1f.0  Intel Corporation Device a2cc
           +-1f.2  Intel Corporation 200 Series/Z370 Chipset Family Power Management Controller
           +-1f.3  Intel Corporation 200 Series PCH HD Audio
           +-1f.4  Intel Corporation 200 Series/Z370 Chipset Family SMBus Controller
           \-1f.6  Intel Corporation Ethernet Connection (2) I219-V

 

Edited by Vr2Io
Link to comment
6 hours ago, Vr2Io said:

你可以用 lspci -Pvt 看看是否 NVMe 接上 root port 1d.0 (SN750), 如是, 即表示它們之間出了問題.

 

lspci  -Pvt

-[0000:00]-+-00.0  Intel Corporation 8th/9th Gen Core 8-core Desktop Processor Host Bridge/DRAM Registers [Coffee Lake S]
           +-01.0-[01]----00.0  Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection
           +-02.0  Intel Corporation CoffeeLake-S GT2 [UHD Graphics 630]
           +-14.0  Intel Corporation 200 Series/Z370 Chipset Family USB 3.0 xHCI Controller
           +-14.2  Intel Corporation 200 Series PCH Thermal Subsystem
           +-16.0  Intel Corporation 200 Series PCH CSME HECI #1
           +-17.0  Intel Corporation 200 Series PCH SATA controller [AHCI mode]
           +-1d.0-[02]----00.0  Sandisk Corp WD Blue SN550 NVMe SSD
           +-1f.0  Intel Corporation Device a2cc
           +-1f.2  Intel Corporation 200 Series/Z370 Chipset Family Power Management Controller
           +-1f.3  Intel Corporation 200 Series PCH HD Audio
           +-1f.4  Intel Corporation 200 Series/Z370 Chipset Family SMBus Controller
           \-1f.6  Intel Corporation Ethernet Connection (2) I219-V

 

运行完命令出来是这个样子,看不太明白

694060700_2022-06-2018_18_27.thumb.png.6b94710b485c303028c899cd1b31ce0d.png

sn750做了缓存盘正常使用中,貌似也没得问题

Link to comment
6 hours ago, Vr2Io said:

你可以用 lspci -Pvt 看看是否 NVMe 接上 root port 1d.0 (SN750), 如是, 即表示它們之間出了問題.

 

lspci  -Pvt

-[0000:00]-+-00.0  Intel Corporation 8th/9th Gen Core 8-core Desktop Processor Host Bridge/DRAM Registers [Coffee Lake S]
           +-01.0-[01]----00.0  Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection
           +-02.0  Intel Corporation CoffeeLake-S GT2 [UHD Graphics 630]
           +-14.0  Intel Corporation 200 Series/Z370 Chipset Family USB 3.0 xHCI Controller
           +-14.2  Intel Corporation 200 Series PCH Thermal Subsystem
           +-16.0  Intel Corporation 200 Series PCH CSME HECI #1
           +-17.0  Intel Corporation 200 Series PCH SATA controller [AHCI mode]
           +-1d.0-[02]----00.0  Sandisk Corp WD Blue SN550 NVMe SSD
           +-1f.0  Intel Corporation Device a2cc
           +-1f.2  Intel Corporation 200 Series/Z370 Chipset Family Power Management Controller
           +-1f.3  Intel Corporation 200 Series PCH HD Audio
           +-1f.4  Intel Corporation 200 Series/Z370 Chipset Family SMBus Controller
           \-1f.6  Intel Corporation Ethernet Connection (2) I219-V

 

仔细看了一下1d口是不是pci转sata口转接板冲突了?如果是这种情况,有什么处理方法没得,还是说就只能换nvme转sta的转接器了?

 

Link to comment
40 minutes ago, Vr2Io said:

1d.0 原來接上了 9215 Marvel SATA 控制器, 這控制器沒有接上 SATA 硬碟, 你可在 bios 裏關閉它就可避免產生報錯.

我刚刚尝试了一下在PCI 设备和 IOMMU 组里面选择在引导时对VIFO选择了绑定,重启之后问题得到解决。非常感谢。2098363482_2022-06-2019_51_31.thumb.png.e39bd6cbc5af7e02513ecf6cdf28aac8.png

Link to comment
  • 1 year later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.