mxx Posted June 24, 2022 Share Posted June 24, 2022 Hello, For a few months now I have consistently had parity check errors, I think the numbers have been about the same ~1500 errors. I've read some posts and tried a couple of parity checks read only and then write corrected. Same results. Yes I have had the occasional unclean shutdown from power loss. Maybe twice in the last year. See attached my diagnostics. Last parity check finished at 02.12am on 25 June. I appreciate your expert opinions! Thanks in advance. server-diagnostics-20220625-0921.zip Quote Link to comment
Solution JorgeB Posted June 25, 2022 Solution Share Posted June 25, 2022 Start by running memtest, also a good idea to replace that old JMB controller, it's causing ATA errors on both connected devices. Quote Link to comment
mxx Posted July 6, 2022 Author Share Posted July 6, 2022 Thank you JorgeB. 6 iterations of memtest completed ok. I replaced the sata controller with one on your recommended list. Parity check returned 55 errors. Diagnostic attached. Parity check finished at Wed 06 Jul 2022 07:43:07 AM local time Any further ideas? server-diagnostics-20220706-1102.zip Quote Link to comment
JorgeB Posted July 6, 2022 Share Posted July 6, 2022 Run another parity check without rebooting and post new diags if sync errors are found. Quote Link to comment
mxx Posted July 7, 2022 Author Share Posted July 7, 2022 Another parity check had 0 errors. Thank you! 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.