I had everything working perfectly fine then I restarted the server trying to get audio functioning within the virtual machine and everything broke. I can get the virtual machine to operate as it did prior to installing the graphics card with VNC graphics. but nothing's happening with the quadro p4000. My logs are apparently 100% full. The log only has this: 

AndrewCityHall kernel: vfio-pci 0000:04:00.0: BAR 1: can't reserve [mem 0x4000000000-0x400fffffff 64bit pref]

 

Any assistance would be greatly appreciated.

 

 

andrewcityhall-diagnostics-20220629-0058.zip

syslinux config, add to the append line:

video=efifb:off

 

Unfortunately unless I did something wrong I still have the same outcome. Tight VNC and Chrome remote desktop refused to connect.

 

 

As a part of my troubleshooting in the BIOS I set it to only be allowed to boot to the "CPU" graphics, and is still set. As well as having a dummy plug in one of the DisplayPort ports.

 

un 29 10:50:18 AndrewCityHall kernel: vfio-pci 0000:04:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=none
Jun 29 10:50:18 AndrewCityHall kernel: br0: port 2(vnet0) entered blocking state
Jun 29 10:50:18 AndrewCityHall kernel: br0: port 2(vnet0) entered disabled state
Jun 29 10:50:18 AndrewCityHall kernel: device vnet0 entered promiscuous mode
Jun 29 10:50:18 AndrewCityHall kernel: br0: port 2(vnet0) entered blocking state
Jun 29 10:50:18 AndrewCityHall kernel: br0: port 2(vnet0) entered forwarding state
Jun 29 10:50:19 AndrewCityHall kernel: vfio-pci 0000:04:00.0: vfio_ecap_init: hiding ecap 0x19@0x900

 

Edited June 29, 20224 yr by TheAndrewGilbert

It looks like I have other issues to still be able to VNC in to the VM but RDP works