I followed @SpaceInvaderOne video to the t everything. And didn’t see an option or easy way to use a bare metal ssd to install on. It only installs on the array correct? 
 

im also having some trouble reinstalling after fixing/messing up XML files. Im getting an error when it downloads macOS onto the purposed 500g hdd I used in the template. 
 

my system is a i9 9900 non k with 64gb ram a 6600xt and hoping to utilize all of that pretty well. 
 

if I can get Mac to run I sometimes have issue without passing through the video card that my onboard video is very low so the whole MacOS system runs super slow.

 

anyone who’s playing with this as well feel free to assist. If not I will edit this as I continue to learn and figure it out and leave the information for the next person. 
 

I also read the article tips for baremetal macOS. I didn’t see any best bios for hackintoshish. 
 

thank you for any help and hopefully I solve all the problems on my own ;)

Hi, 6600 xt is supported from mac os monterey 12.1, when apple introduced the drivers.

To make it work just passthrough the gpu (audio and video), edit the xml to set them as a multifunction device.

Then, you need to add:

agdpmod=pikera

to your boot-args in opencore config.plist, otherwise black screen.

 

As far as passing through the ssd you have several option, and general settings applies also to the mac os vm; if you do custom modifications other than the ones macinabox know, don't use the scripts otherwise they will mess the xml, you need to manual edit it.

You can passthrough the nvme controller, or the sata controller to which the ssd is attached, or use a type=block disk device to pass the id of the disk (by-id) emulating a virtual controller.